Contact Us Email:superlumination@cox.net
Search

Compatible with: Honda

  • Zinc Plated Flange 10mm 14mm Hex Nuts M10 x 1.25 Metric 90212-SA5-003 Serrated Honda Exhaust Nuts PN:[H2138]
    AB-MB-9028
    Compatible with: Honda
    AB-MB-9028
    Zinc Plated Flange 10mm 14mm Hex Nuts M10 x 1.25 Metric 90212-SA5-003 Serrated Honda Exhaust Nuts
    Thread Size: M10-1.25  
      These nuts require a 14mm wrench or socket to tighten.
    Compatible with Zinc Plated Flange 10mm 14mm Hex Nuts M10 x 1.25 Metric 90212-SA5-003 Serrated Honda Exhaust Nuts PN:[H2138]
    Body Fender Nuts Bolts Screws
    Select Quantity
  • Splash Shield & General Purpose Phillips Truss Head Sems Screw M4.8-1.61 X 19mm Honda PN 90114-SE0-000 Aeveco 20259 PN:[H2033]
    AB-MB-9080
    Compatible with: Honda
    90114-SE0-000
    Splash Shield & General Purpose Phillips Truss Head Sems Screw M4.8-1.61 X 19mm Honda PN 90114-SE0-000 Aeveco 20259
    Thread Size: M4.8-1.61 Shaft Length 3/4" (20mm)
    Washer Size:15mm (5/8") Phillips Screw Slot.
    Compatible with Splash Shield & General Purpose Phillips Truss Head Sems Screw M4.8-1.61 X 19mm Honda PN 90114-SE0-000 Aeveco 20259 PN:[H2033]
    Body Fender Nuts Bolts Screws
    Select Quantity
  • Phillips Truss Head Tap Screw M4.2-1.41 X 16mm Aeveco 16720 PN:[H2054]
    AB-MB-9084
    Compatible with: Honda
    AB-MB-9084
    Phillips Truss Head Tap Screw M4.2-1.41 X 16mm Aeveco 16720
    Thread Size: 4.2-1.41 Shaft Length 5/8" (16mm)
      Phillips Screw Slot.
    Compatible with Phillips Truss Head Tap Screw M4.2-1.41 X 16mm Aeveco 16720 PN:[H2054]
    Body Fender Nuts Bolts Screws
    Select Quantity
  • Compatible with GM: 21075686 Saturn 2 Door & 4 Door Models 1991-On PN:[10-569] Auveco 17222 YT3450
    AB-PC-0003
    Compatible with: Honda
    90653-HC4-900
    Rocker Panel, Wheel Liner & Air Inlet Duct Applications
    Head Diameter: 15mm Stem Length: 20mm
    Fits Into 8mm Hole Rocker Panel, Wheel Liner & Air Inlet Duct Applications
    Compatible with GM: 21075686 Saturn 2 Door & 4 Door Models 1991-On
    Push Type Retainers
    Select Quantity
  • Compatible with Acura: 91503-SP0-003 Legend 1991-On PN:[10-570] Auveco 17267
    AB-PC-0006
    Compatible with: Honda
    91503-SP0-003
    Front & Rear Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 15mm
    Fits Into 10mm Hole 0
    Compatible with Acura: 91503-SP0-003 Legend 1991-On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 75305-SH2-003 Civic & CRV 1996 - On PN:[10-296] Auveco 20784
    AB-PC-0009
    Compatible with: Honda
    75305-sh2-003
    Body Side Moulding Clip
    Head Size: 12mm x 15mm Stem Length: 15mm
    0 0
    Compatible with Honda: 75305-SH2-003 Civic & CRV 1996 - On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with GM: 94858299 Geo Prizm & Pontiac Vibe 1998-On Toyota: 90467-10161 Sienna, Solara & Tercel 1990-On PN:[10-391] Auveco 18876,Auveco 19910,Auveco 21206
    AB-PC-0015
    Compatible with: Honda
    91560-S6A-003
    Trim Board Retainer
    Top Head Diameter: 13mm Middle Head Diameter: 16mm
    Bottom Head Diameter: 18mm Stem: 9x9x14mm 20mm overall
    Compatible with GM: 94858299 Geo Prizm & Pontiac Vibe 1998-On Toyota: 90467-10161 Sienna, Solara & Tercel 1990-On
    Button Head Retainers
    Select Quantity
  • Compatible with:Honda # 75521-611-0000 Mazda # 9991-00-601 Nissan # 96706-P0105 Toyota # 90189-06010  PN:[10-129] Auveco 14274, 20350
    AB-PC-0016
    Compatible with: Honda
    75521-611-000
    #10 Screw Size
    Snaps Into 8.5mm X 8.5mm Hole 0
    0 0
    Compatible with:Honda # 75521-611-0000 Mazda # 9991-00-601 Nissan # 96706-P0105 Toyota # 90189-06010
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with:Honda # 75521-611-0000 Mazda # 9991-00-601 Nissan # 96706-P0105 Toyota # 90189-06010  PN:[10-129] Auveco 14274, 20350
    AB-PC-0016
    Compatible with: Honda
    90866-SA0-000
    #10 Screw Size
    Snaps Into 8.5mm X 8.5mm Hole 0
    0 0
    Compatible with:Honda # 75521-611-0000 Mazda # 9991-00-601 Nissan # 96706-P0105 Toyota # 90189-06010
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Acura & Honda CL 2001-03 Integra 1994-01 Legend 1987-90 MDX 2001-06 RSX 2002-06 TL 1999-03 Honda Civic 2002-05 CR-V 1997-01 CRX 1989 Del Sol 1993-97 Element 2003-08 Insight 2000-06 Odyssey 1999-08 Pilot 2003-08 Ridgeline 2006-08 N/A Auveco 19741
    AB-PC-0020
    Compatible with: Honda
    90670-SG0-003
    Door Panel Screw Grommet
    #8 (M4.2) Screw Size Head Diameter: 12mm
    Stem Length: 16mm Fits Into 7mm x 7mm Hole
    Compatible with Acura & Honda CL 2001-03 Integra 1994-01 Legend 1987-90 MDX 2001-06 RSX 2002-06 TL 1999-03 Honda Civic 2002-05 CR-V 1997-01 CRX 1989 Del Sol 1993-97 Element 2003-08 Insight 2000-06 Odyssey 1999-08 Pilot 2003-08 Ridgeline 2006-08
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 91550-SH3-003 Civic, Accord Wagon & Del Sol 1993-On PN:[10-072] Auveco 19142
    AB-PC-0035
    Compatible with: Honda
    91550-SH3-003
    Pillar Garnish, Side And Trunk Lining Push-Type Retainer
    Head Diameter: 15mm Stem Length: 13mm
    Fits Into 7mm Square Hole 0
    Compatible with Honda: 91550-SH3-003 Civic, Accord Wagon & Del Sol 1993-On
    Push Type Retainers
    Select Quantity
  • Compatible with Nissan: 01553-09241 240SX & Maxima 1994-On PN:[10-680] Auveco 20247
    AB-PC-0040
    Compatible with: Honda
    MR-200300
    Bumper Push-Type Retainer
    Push-Type Retainer Head Diameter: 18mm
    Stem Length: 15mm Fits Into 10mm Hole
    Compatible with Nissan: 01553-09241 240SX & Maxima 1994-On
    Push Type Retainers
    Select Quantity
  • Compatible with Nissan: 66824-01G00 PN:[10-085] Auveco 16783
    AB-PC-0043
    Compatible with: Honda
    90116-675-003ZA
    Push-Type Retainer
    Head Diameter: 12mm Stem Length: 8mm (N.I. The Pin)
    Fits Into 6mm Hole 0
    Compatible with Nissan: 66824-01G00
    Push Type Retainers
    Select Quantity
  • Compatible with Toyota: 90467-07164 Camry, Echo, MR2 & Sienna 1997 - On PN:[10-083] Auveco 20908,Auveco 19239,
    AB-PC-0048
    Compatible with: Honda
    91512-SX0-003
    Fender Splash Shield Push-Type Retainer
    Head Diameter: 20mm Stem Length: 10mm
    Fits Into 7mm Hole 0
    Compatible with Toyota: 90467-07164 Camry, Echo, MR2 & Sienna 1997 - On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91515-SR3-000 Acura Integra, Honda Civic, CR-V & Del Sol 1992 - On PN:[10-229] Auveco 19483
    AB-PC-0058
    Compatible with: Honda
    91515-SR3-000
    Rear Hood Cowl Weatherstrip Retaining Clip
    Head Size: 8mm x 18mm Stem Length: 15mm
    Fits Into 7mm Hole 0
    Compatible with Honda & Acura: 91515-SR3-000 Acura Integra, Honda Civic, CR-V & Del Sol 1992 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91547-SE0-0030 PN:[10-502] Auveco 14688
    AB-PC-0063
    Compatible with: Honda
    91547-SE0-0030
    Hood Prop Rod Clip
    Holds 6mm Prop Rod Snaps Into 7mm Hole
    0 0
    Compatible with Honda: 91547-SE0-0030
    Door Tailgate Hood Lock Clips
    Select Quantity
  • Compatible with Acura / Honda: 90657-SB0-003 Accord 83 - 02, CR-V 02 - 06, Odyssey 95 - 98, Prelude 83 - 01, Legend PN:[10-082] Auveco 19186
    AB-PC-0066
    Compatible with: Honda
    91533-SG0-000
    Splash Shield Retainer
    Head Diameter: 11mm Stem Length: 10mm
    Fits Into 8mm Hole 0
    Compatible with Acura / Honda: 90657-SB0-003 Accord 83 - 02, CR-V 02 - 06, Odyssey 95 - 98, Prelude 83 - 01, Legend
    Push Type Retainers
    Select Quantity
  • Compatible with Acura / Honda: 90657-SB0-003 Accord 83 - 02, CR-V 02 - 06, Odyssey 95 - 98, Prelude 83 - 01, Legend PN:[10-082] Auveco 19186
    AB-PC-0066
    Compatible with: Honda
    90657-SB0-003
    Splash Shield Retainer
    Head Diameter: 11mm Stem Length: 10mm
    Fits Into 8mm Hole 0
    Compatible with Acura / Honda: 90657-SB0-003 Accord 83 - 02, CR-V 02 - 06, Odyssey 95 - 98, Prelude 83 - 01, Legend
    Push Type Retainers
    Select Quantity
  • Compatible with Acura: 90505-SL0-003, GM: 94852368, Mitsubishi: MB888869 Eclipse & Galant, Toyota: 90467-08155 1993-On PN:[10-081] Auveco 19140
    AB-PC-0069
    Compatible with: Honda
    90505-SL0-003
    Push-Type Retainer
    Head Diameter: 20mm Stem Length: 21mm
    Fits Into 8mm Hole 0
    Compatible with Acura: 90505-SL0-003, GM: 94852368, Mitsubishi: MB888869 Eclipse & Galant, Toyota: 90467-08155 1993-On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda # 91513-SM4-000 Accord 1991-On, Acura CL 97-03, Integra 94-01, Legend 91-95, MDX 01-06, RL 96-04, RSX 02-06, TL 95-08, TSX 04-08, Vigor 92-94 PN:[10-289] Auveco 17096
    AB-PC-0079
    Compatible with: Honda
    91513-SM4-000
    Rocker Panel Moulding Clip
    20mm Wide 20mm Long
    Fits Into 12mm Hole 0
    Compatible with Honda # 91513-SM4-000 Accord 1991-On, Acura CL 97-03, Integra 94-01, Legend 91-95, MDX 01-06, RL 96-04, RSX 02-06, TL 95-08, TSX 04-08, Vigor 92-94
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 75305-SH4-003 Civic 1996 - On PN:[10-297] Auveco 20785
    AB-PC-0246
    Compatible with: Honda
    75305-SH4-003
    Body Side Moulding Clip
    Head Size: 14mm x 15mm Stem Length: 14mm
    0 0
    Compatible with Honda: 75305-SH4-003 Civic 1996 - On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91560-S84 PN:[11-360] Auveco 21149,Auveco 20959
    AB-PC-0247
    Compatible with: Honda
    91560-S84-A01
    Trim Panel Retainer
    Top Head Diameter 13mm Middle Head Diameter: 16.5mm
    Bottom Head Diameter: 15mm Stem 9.5x11mm
    Compatible with Honda: 91560-S84
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 90602-SFA-004 Acura RL and Honda Civic, Civic Hybrid & Odyssey 2005 - On  N/A Auveco 21308
    Acura-BH-0301
    Compatible with: Honda
    90602-SFA-004
    Cowl & Dash Moulding Clips
    Top Head Size: 13mm x 14mm Bottom Head Diameter: 16mm
    Stem Length: 13mm 0
    Compatible with Honda & Acura: 90602-SFA-004 Acura RL and Honda Civic, Civic Hybrid & Odyssey 2005 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91513-SE0-003 Accord & Prelude 1983-On PN:[10-065] Auveco 18818
    Acura-BH-0330
    Compatible with: Honda
    91513-se0-003
    Hood Seal Retainer
    Head Size: 7mm x 16mm Stem Length: 12mm
    Fits Into 5mm Hole 0
    Compatible with Honda: 91513-SE0-003 Accord & Prelude 1983-On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91530-SP1-003 Accord, Civic & Odyssey Acura 3.5 RL 1992-On PN:[10-066] Auveco 18877
    Acura-BH-0331
    Compatible with: Honda
    91530-sp1-003
    Weatherstrip Retainer
    Head Size: 5mm x 15mm Stem Length: 10mm
    Fits Into 6mm Hole 0
    Compatible with Honda & Acura: 91530-SP1-003 Accord, Civic & Odyssey Acura 3.5 RL 1992-On
    Button Head Retainers
    Select Quantity
  • Compatible with: Honda 91530-ST5-003 96 - 05 Civic , 03 - 07 Element, 99 - 04 Odyssey, 03 - 07 Pilot, 06 - 07 Ridgeline PN:[10-068] Auveco 19116
    Acura-BH-0332
    Compatible with: Honda
    91530-st5-003
    Weatherstrip Retainer - Front & Rear Doors
    Head Dimensions: 5mm x 15mm Fits Into 6mm Hole
    Stem Length: 10mm 0
    Compatible with: Honda 91530-ST5-003 96 - 05 Civic , 03 - 07 Element, 99 - 04 Odyssey, 03 - 07 Pilot, 06 - 07 Ridgeline
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 90687-SA5-0030 PN:[10-095] Auveco 14282
    Acura-BH-0334
    Compatible with: Honda
    90687-sa5-0030
    Retaining Clip Panel Retainer Clips Fastener
    Head Diameter: 13mm Stem Length: 15mm
    Snaps Into 5mm Hole Panel Thickness: 4mm
    Compatible with Honda: 90687-SA5-0030
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91518-SM4-003 Acura Integra & Honda Civic 1994 - On PN:[10-621] Auveco 19114
    Acura-BH-0347
    Compatible with: Honda
    91518-sm4-003
    Hood & Trunk Moulding Retaining Clip
    Head Diameter: 12mm Stem Length: 9mm
    Fits Into 6mm Hole 0
    Compatible with Honda & Acura: 91518-SM4-003 Acura Integra & Honda Civic 1994 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91568-SR2-003 Odyssey 1995 - On PN:[10-628] Auveco 19171
    Acura-BH-0348
    Compatible with: Honda
    91568-sr2-003
    Weatherstrip Retainer
    Head Size: 5mm x 15mm Stem Length: 10mm
    Fits Into 5mm Hole 0
    Compatible with Honda: 91568-SR2-003 Odyssey 1995 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91518-S10-003 Odyssey 1999 - On PN:[10-663] Auveco 19682
    Acura-BH-0351
    Compatible with: Honda
    91518-s10-003
    Hood Seal Retaining Clip
    Head Diameter: 11mm Stem Diameter: 7mm
    Stem Length: 8mm Fits Into 6mm Hole
    Compatible with Honda: 91518-S10-003 Odyssey 1999 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91520-SM4-C010 1990-On PN:[10-587]
    Acura-BH-0376
    Compatible with: Honda
    91520-sm4-c010
    Hood Insulation Retaining Clip
    Head Diameter: 10mm Stem Length: 10mm
    Panel Thickness: 4mm Stem Diameter: 7.5mm 6mm Hole
    Compatible with Honda & Acura: 91520-SM4-C010 1990-On
    Button Head Retainers
    Select Quantity
  • Compatible with Acura & Honda: 90652-SB2-023 
CL 1997 - 03
Integra 1986 - 87
Legend 1986 - 90
MDX 2001 - 08
TL 1999 - 03
Accord 2004 - 08
Civic 1984 - 05
CR-V 1984 - 91
Del Sol 1993 - 08
FIT 2007 - 08
Odyssey 2008
Pilot 2003 - 08
Prelude 1988 - 01
Ridgeline 2006 - 08
 PN:[10-549] Auveco 16949
    Acura-CS-0345
    Compatible with: Honda
    90652-SB2-023
    Windshield Washer Hose Retainer
    For 3mm (7/64") I.D. 5mm (13/64") O.D. Hose Fits Into 7mm (9/32") Square Hole
    0 0
    Compatible with Acura & Honda: 90652-SB2-023 CL 1997 - 03 Integra 1986 - 87 Legend 1986 - 90 MDX 2001 - 08 TL 1999 - 03 Accord 2004 - 08 Civic 1984 - 05 CR-V 1984 - 91 Del Sol 1993 - 08 FIT 2007 - 08 Odyssey 2008 Pilot 2003 - 08 Prelude 1988 - 01 Ridgeline 2006 - 08
    Cable Strap Clamps
    Select Quantity
  • Compatible with Honda: 90654-SA4-003 Civic 1998 - On PN:[10-667] Auveco 19730
    Acura-CS-0352
    Compatible with: Honda
    90654-sa4-003
    Wire Routing Clip
    Holds 6mm Diameter Wire Fits Into 7mm Hole
    0 0
    Compatible with Honda: 90654-SA4-003 Civic 1998 - On
    Cable Strap Clamps
    Select Quantity
  • Compatible with Honda & Acura: 91558-SE3-003 Acura CL, Legend, NSX, RL,TI, TL, TSX & Vigor and Honda Accord Civic, CR-V, Insight Odyssey, Pilot, Prelude & Ridgeline 1991 - On N/A Auveco 21388
    Acura-DC-0327
    Compatible with: Honda
    91558-SE3-003
    Hood Release Cable Fuel Door Release Cable and Sliding Door Lock Cable Clip
    Maximum Cable Diameter: 5mm Overall Height In Closed Position: 17mm
    Fits Into 7mm Hole 0
    Compatible with Honda & Acura: 91558-SE3-003 Acura CL, Legend, NSX, RL,TI, TL, TSX & Vigor and Honda Accord Civic, CR-V, Insight Odyssey, Pilot, Prelude & Ridgeline 1991 - On
    Door Tailgate Hood Lock Clips
    Select Quantity
  • Compatible with Honda: 90677-se0-003 PN:[10-171] Auveco 16950
    Acura-DC-0338
    Compatible with: Honda
    90677-se0-003
    Hood Prop Rod Clip
    Holds 8mm Prop Ro 0
    0 0
    Compatible with Honda: 90677-se0-003
    Door Tailgate Hood Lock Clips
    Select Quantity
  • Compatible with Acura 91501-SP1-003 Legend Coupe 1991-95 N/A Auveco 19225
    Acura-MC-0304
    Compatible with: Honda
    91501-SP1-003
    Side Sill Garnish Moulding Clip
    0 0
    0 0
    Compatible with Acura 91501-SP1-003 Legend Coupe 1991-95
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91512-S50-003 Acura TSX & ZDX and Honda Accord, Civic, Crosstour, Fit, Insight, Odyssey & Pilot 2012 - 01 N/A Auveco 21555
    Acura-MC-0306
    Compatible with: Honda
    91512-S50-003
    License Plate Garnish & Trim Moulding Clip With Sealer
    Top Head Size: 12mm x 17mm Bottom Head Size: 16mm x 17mm
    Stem Diameter: 13mm Stem Length: 12mm
    Compatible with Honda: 91512-S50-003 Acura TSX & ZDX and Honda Accord, Civic, Crosstour, Fit, Insight, Odyssey & Pilot 2012 - 01
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 72431-S2X-003 Acura RSX and Honda Civic, CR-Z & Insight 2006 - 01 N/A Auveco 21639
    Acura-MC-0308
    Compatible with: Honda
    72431-S2X-003
    Moulding Clips
    Top Head Size: 8mm x 10.5mm Bottom Head Size: 8mm x 10.5mm
    Bottom Head Size: 11mm x 16mm Overall Height: 14.6mm
    Compatible with Honda: 72431-S2X-003 Acura RSX and Honda Civic, CR-Z & Insight 2006 - 01
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with: Honda # 91512-SE0-003 86 - 02 Accord , 88 - 95 Civic , 03 - 07 Element , 95 - 07 Odyssey , 03 - 05 Pilot , 88 - 96 Prelude   PN:[10-127] Auveco 18512
    Acura-MC-0336
    Compatible with: Honda
    91512-se0-003
    Windshield Washer Hose Clip
    11mm Wide 42mm Long
    Holds 6.3mm (1/4") Hose 0
    Compatible with: Honda # 91512-SE0-003 86 - 02 Accord , 88 - 95 Civic , 03 - 07 Element , 95 - 07 Odyssey , 03 - 05 Pilot , 88 - 96 Prelude
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Acura & Honda: 91541-SM4-003,91542-SP0-003 Legend 1991-95 Accord 1990 - 93 PN:[10-662] Auveco 19670
    Acura-MC-0350
    Compatible with: Honda
    91541-sm4-003
    Rear Window Adjustable Side Moulding Clip
    0 0
    0 0
    Compatible with Acura & Honda: 91541-SM4-003,91542-SP0-003 Legend 1991-95 Accord 1990 - 93
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 75306-SDA-A01 Accord 2003 – 07 PN:[11-181] Auveco 20782
    Acura-MC-0357
    Compatible with: Honda
    75306-sda-a01
    Moulding Clip
    Head Size: 21mm x 27mm Stem Length: 11mm
    0 0
    Compatible with Honda: 75306-SDA-A01 Accord 2003 – 07
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 75306-SZA-A01 Pilot 2011 - 09 PN:[11-199] Auveco 21470
    Acura-MC-0358
    Compatible with: Honda
    75306-sza-a01
    Moulding Clips
    Top Head Size: 7.5mm x 10mm Bottom Head Size: 9.5mm
    Overall Height: 16mm 0
    Compatible with Honda: 75306-SZA-A01 Pilot 2011 - 09
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 75305-S0A-003 Civic, CRV, Odyssey & Pilot 2006 – 1999 C295 Auveco 20783
    Acura-MC-0372
    Compatible with: Honda
    75305-s0a-003
    Body Side Moulding Clip
    Head Size: 6.5mm & 13mm x 18mm Stem Length: 12mm
    0 0
    Compatible with Honda: 75305-S0A-003 Civic, CRV, Odyssey & Pilot 2006 – 1999 C295
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Acura & Honda: 91503-SK7-013 Integra 1990 - 01, Honda Odyssey 2005 - 08, S2000 2000 - 08 N/A Auveco 19723
    Acura-NG-0318
    Compatible with: Honda
    91503-SK7-013
    Center Pillar Moulding Screw Grommet
    #4 Screw Size Head Size: 10mm x 14mm
    Stem Length: 10mm 0
    Compatible with Acura & Honda: 91503-SK7-013 Integra 1990 - 01, Honda Odyssey 2005 - 08, S2000 2000 - 08
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with: Honda: 90661-SC7-0030 Mazda: H001-50-841 Mitsubishi: MS-480012 Nissan: 01651-00481, 01651-00481, 74798-S9000 Toyota: 90189-06042 PN:[10-034] Auveco 14695
    Acura-NG-0328
    Compatible with: Honda
    90661-sc7-0030
    Screw Grommet
    #8 Screw Size Head Diameter: 16mm
    Stem Length: 17mm Fits Into 8mm x 8mm Hole
    Compatible with: Honda: 90661-SC7-0030 Mazda: H001-50-841 Mitsubishi: MS-480012 Nissan: 01651-00481, 01651-00481, 74798-S9000 Toyota: 90189-06042
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 90656-671-6310M1 PN:[10-130]
    Acura-NG-0337
    Compatible with: Honda
    90656-671-6310m
    Screw Grommets
    Head Size: 13mmX15mm Screw Size: #14 (1/4")
    Snaps Into 8.5mmx10.5mm Hole 0
    Compatible with Honda: 90656-671-6310M1
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda & Acura: 75306-SV1-A01 Accord 1996 - 02, CL 1997 - 99 PN:[10-260] Auveco 20602
    Acura-NG-0340
    Compatible with: Honda
    75306-sv1-a01
    Body Side Moulding Clip
    Head Size: 14mm x 14mm Stem Length: 14mm
    0 0
    Compatible with Honda & Acura: 75306-SV1-A01 Accord 1996 - 02, CL 1997 - 99
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 34301-692-A0000 PN:[10-269]
    Acura-NG-0341
    Compatible with: Honda
    34301-692-A0000
    Screw Grommets
    Screw Size: #8 Length: 9.5mm
    Width: 9.5mm Fits Into 6mm Hole
    Compatible with Honda: 34301-692-A0000
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 91604-SD2-013 Civic 1989-On PN:[10-299] Auveco 18454
    Acura-NG-0342
    Compatible with: Honda
    91604-sd2-013
    Hood Prop Rod Grommet
    Holds 8mm Rods Fits 11mm Hole
    0 0
    Compatible with Honda: 91604-SD2-013 Civic 1989-On
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 90679-692-0030 PN:[10-857] Auveco 14308
    Acura-NG-0354
    Compatible with: Honda
    90679-692-0030
    Body Side Moulding Clip
    10mm Wide, 12mm Long Snaps Into 10mm Hole
    0 0
    Compatible with Honda: 90679-692-0030
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 90672-671-8110M1, Toyota: 90189-04013 PN:[10-157]
    Acura-NG-0368
    Compatible with: Honda
    90672-671-8110m
    Screw Grommet #6 Screw Size
    Head Diameter: 14mm Stem Length: 15mm
    Fits Into 7mm x 7mm Hole 0
    Compatible with Honda: 90672-671-8110M1, Toyota: 90189-04013
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 90687-671-0030 PN:[10-087] Auveco 14319
    Acura-NG-0370
    Compatible with: Honda
    90687-671-0030
    Retaining Clip
    Head Diameter: 20mm Stem Length: 20mm
    Snaps Into 10mm Hole Stem Diameter: 18mm
    Compatible with Honda: 90687-671-0030
    Button Head Retainers
    Select Quantity
  • Compatible with: Honda: 90675-SB3-003, Mazda: FB01-56-964, Nissan: 63876-95596 PN:[10-045] Auveco 16000
    Acura-PR-0329
    Compatible with: Honda
    90675-sb3-003
    Push-Type Retainer
    Head Diameter: 20mm Stem Length: 9mm
    Fits Into 8mm Hole 0
    Compatible with: Honda: 90675-SB3-003, Mazda: FB01-56-964, Nissan: 63876-95596
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 90505-SM4-003 Accord 1990-On
 PN:[10-122] Auveco 17057
    Acura-PR-0335
    Compatible with: Honda
    90505-sm4-003
    Push-Type Retainer
    Head Diameter: 18mm Stem Length: 21mm
    Fits Into 8mm Hole 0
    Compatible with Honda: 90505-SM4-003 Accord 1990-On
    Push Type Retainers
    Select Quantity
  • Compatible with: GM: 94198687 , Honda: 90657-SA6-0030 , Mazda: N304-13-356-A PN:[10-175] Auveco 14697
    Acura-PR-0339
    Compatible with: Honda
    90657-sa6-0030
    Push-Type Retainer
    Head Diameter: 14mm Stem Length: 11mm
    Fits Into 7mm Hole 0
    Compatible with: GM: 94198687 , Honda: 90657-SA6-0030 , Mazda: N304-13-356-A
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 90505-SX0-003 Odyssey 1995 - On PN:[10-649] Auveco 19453
    Acura-PR-0349
    Compatible with: Honda
    90505-sx0-003
    Garnish Side Protector Push-Type Retainer
    Head Diameter: 18mm Stem Length: 15mm (Not Including The Pin)
    Fits Into 8mm Hole 0
    Compatible with Honda: 90505-SX0-003 Odyssey 1995 - On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91501-S04-003 Civic & Del Sol 1993-On PN:[10-623]
    Acura-PR-0361
    Compatible with: Honda
    90157-sp0-901
    Front Fender Push-Type Retainer
    Head Diameter: 20mm Stem Length: 10mm
    Fits Into 8mm Hole 0
    Compatible with Honda: 91501-S04-003 Civic & Del Sol 1993-On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91505-TM8-003 Acura ILX and Honda Insight 2012 - A21706 A21706 C1518
    Acura-PR-0371
    Compatible with: Honda
    91505-TM8-003
    Bumper and Wheel Well Liner Push-Type Retainer
    Head Diameter: 20mm Stem Length: 14mm
    Fits Into 10mm Hole 0
    Compatible with Honda: 91505-TM8-003 Acura ILX and Honda Insight 2012 - A21706
    Push Type Retainers
    Select Quantity
  • Compatible with Honda Trunk Side Trim Clip 90667-TC0-U01ZA PN:[11-864]
    Acura-PR-0377
    Compatible with: Honda
    90667TC0U01ZA
    Trunk Side Trim Clip
    Top Head Diameter: 15mm Bottom Head Diameter: 16mm
    Stem Length:14mm Fits Into 6mm Hole
    Compatible with Honda Trunk Side Trim Clip 90667-TC0-U01ZA
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91578-SV4-003 Accord 1994-On PN:[10-076] Auveco 18457
    Acura-RC-0333
    Compatible with: Honda
    91578-sv4-003
    Radiator Grille Clip
    0 0
    0 0
    Compatible with Honda: 91578-SV4-003 Accord 1994-On
    Retainer Clips
    Select Quantity
  • Compatible with Acura & Honda: 90666-SS0-003 Acura Legend 1992-95, TL 1995-98, Honda Prelude 1992-96 PN:[10-668] Auveco 19740
    Acura-RC-0353
    Compatible with: Honda
    90666-ss0-003
    Roof Moulding Clip
    0 0
    0 0
    Compatible with Acura & Honda: 90666-SS0-003 Acura Legend 1992-95, TL 1995-98, Honda Prelude 1992-96
    Retainer Clips
    Select Quantity
  • Compatible with Honda Part Number: 90666-SDA-A01 PN:[10-887]
    Acura-RC-0356
    Compatible with: Honda
    90666-sda-a01
    Honda Snap Fit Fairing & Cowling Clips
    0 0
    0 0
    Compatible with Honda Part Number: 90666-SDA-A01
    Retainer Clips
    Select Quantity
  • Compatible with BMW Honda Renault Peugeot PN:[10-185] Auveco 20187
    German-PR-0433
    Compatible with: Honda
    JC-RCX010-2
    SIDE SILL SKIRT CLIPS EXTERIOR
    Head Size: 12mm Length: 12mm
    Fits Into 5mm Hole  
    Compatible with BMW Honda Renault Peugeot
    Push Type Retainers
    Select Quantity
  • Compatible with Acura & Honda: 90602-S5A-003 Acura RSX and Honda Civic & CR-V 2001 - On PN:[11-344] Auveco 21059
    Honda-BH-0243
    Compatible with: Honda
    90602-S5A-003
    Cowl Vent Retainer
    Top Head: 12mm x 13mm Middle Head Diameter: 16mm
    Bottom Head Diameter: 18mm Stem Diameter: 8.5mm x 8.5mm
    Compatible with Acura & Honda: 90602-S5A-003 Acura RSX and Honda Civic & CR-V 2001 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda/Acura : 91560-SP0-003 Acura Integra & Legend,Honda Accord, Civic, Prelude, Odyssey & Del Sol 1991-On PN:[10-625] Auveco 19145,Auveco 20411
    Honda-BH-0249
    Compatible with: Honda
    91560-SP0-003
    Front & Rear Door Trim Panel Retainer
    Small Head Diameter: 13mm Large Head Diameter: 17mm
    Stem Diameter: 9mm Stem Length: 12mm
    Compatible with Honda/Acura : 91560-SP0-003 Acura Integra & Legend,Honda Accord, Civic, Prelude, Odyssey & Del Sol 1991-On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91560-SZ3-003 Fit 2007 - 08, Odyssey 1999 - 04, Prelude 1997 - 01, S2000 2000 - 08, RL 1996 - 04 PN:[10-876]
    Honda-BH-0250
    Compatible with: Honda
    91560-SZ3-003
    Door Trim Panel Retainer
    Small Head Diameter: 13mm Large Head Diameter: 17mm
    Stem Diameter: 9.5mm Stem Length: 12mm
    Compatible with Honda & Acura: 91560-SZ3-003 Fit 2007 - 08, Odyssey 1999 - 04, Prelude 1997 - 01, S2000 2000 - 08, RL 1996 - 04
    Button Head Retainers
    Select Quantity
  • Compatible with Acura & Honda: 91502-S84-A11 CL 2001-03, MDX 2001-06, RSX 2002-06, TL 1999-03, Accord 1998-02, Civic 2001-05, CR-V 2002-06, Element 2003-08, Insight 2000-06, Odyssey 1999-08, Pilot 2003-08, Ridgeline 2006-08 N/A Auveco 19683
    Honda-BH-1000
    Compatible with: Honda
    91502-S84-A11
    Cowl Vent Retaining Clip
    Head Diameter: 6mm x 16mm Stem Length: 14mm
    Fits Into 6mm Hole 0
    Compatible with Acura & Honda: 91502-S84-A11 CL 2001-03, MDX 2001-06, RSX 2002-06, TL 1999-03, Accord 1998-02, Civic 2001-05, CR-V 2002-06, Element 2003-08, Insight 2000-06, Odyssey 1999-08, Pilot 2003-08, Ridgeline 2006-08
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 90682-SEA-003 Acura TSX and Honda Civic & Odyssey 2004-On PN:[11-269] Auveco 20954
    Honda-BH-1003
    Compatible with: Honda
    90682-SEA-003
    Fender Apron Grommet
    Head Diameter: 20mm Stem Length: 12mm
    Fits Into 9mm Square Hole 0
    Compatible with Honda & Acura: 90682-SEA-003 Acura TSX and Honda Civic & Odyssey 2004-On
    Button Head Retainers
    Select Quantity
  • Compatible with Acura & Honda: 90666-SA7-003ZW Accord Wagon & Prelude, Acura 2.5TL, 3.2TL, 3.5,Integra & Legend 1987 - On PN:[10-187]
    Honda-BH-1005
    Compatible with: Honda
    90666-SA7-003
    Trunk Lining Retainer
    Head Diameter: 16mm Stem Diameter: 5mm Square
    Stem Length: 16mm 0
    Compatible with Acura & Honda: 90666-SA7-003ZW Accord Wagon & Prelude, Acura 2.5TL, 3.2TL, 3.5,Integra & Legend 1987 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Acura & Honda: 90669-SP0-003ZA Acura CL 2001-03, Legend 1991-95, TL 2001-03, Honda Civic 1998-00 N/A
    Honda-BH-1006
    Compatible with: Honda
    90669-SP0-003
    Trunk Trim Retainer
    Head Diameter: 16mm Stem Diameter: 6mm
    Stem Length: 27mm 0
    Compatible with Acura & Honda: 90669-SP0-003ZA Acura CL 2001-03, Legend 1991-95, TL 2001-03, Honda Civic 1998-00
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 72311-S5S-003 Acura RDX and Honda Civic, CR-V & Fit 2003 - PN:[10-247]
    Honda-BH-1007
    Compatible with: Honda
    72311-S5S-003
    Weatherstrip Retaining Clip
    Top Head Size: 5mm x 15mm Bottom Head Diameter: 9.5mm
    Stem Diameter: 7mm Stem Length: 11mm
    Compatible with Honda: 72311-S5S-003 Acura RDX and Honda Civic, CR-V & Fit 2003 -
    Button Head Retainers
    Select Quantity
  • Compatible with Acura & Honda: 90700-SJ4-000 Legend 1991-On Honda 1998-On PN:[10-608] Auveco 18746
    Honda-BH-1010
    Compatible with: Honda
    90700-SJ4-000
    Hood Insulation Retainer
    Head Diameter: 30mm Stem Diameter: 10mm
    Stem Length: 6mm 0
    Compatible with Acura & Honda: 90700-SJ4-000 Legend 1991-On Honda 1998-On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 90667-SD4-003 Accord 1990 - 97, Prelude 1992 - 96, CL 1997 - 99, Legend 1986 - 90, NSX 1991 - 05, Vigor 1992 - 94 N/A Auveco 19464
    Honda-BH-1011
    Compatible with: Honda
    90667-SD4-003
    Roof Lining Retainer
    Top Head Diameter: 13mm Bottom Head Diameter: 16mm
    Stem Diameter: 7mm Stem Length: 7mm
    Compatible with Honda & Acura: 90667-SD4-003 Accord 1990 - 97, Prelude 1992 - 96, CL 1997 - 99, Legend 1986 - 90, NSX 1991 - 05, Vigor 1992 - 94
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91563-SCV-003 Acura TL and Honda Element, Odyssey & Pilot 2003 - On N/A
    Honda-BH-1013
    Compatible with: Honda
    91563-SCV-003
    Weatherstrip Retainer
    Head Size: 5mm x 15mm Bottom Head Diameter: 6.5mm
    Stem Diameter: 7mm Stem Length: 8.5mm
    Compatible with Honda: 91563-SCV-003 Acura TL and Honda Element, Odyssey & Pilot 2003 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda:  90108-SW3-003 95-02 Accord, 95-04Odyssey, 97 - 01 Prelude & 00-01 S2000 N/A Auveco 19470
    Honda-BH-1015
    Compatible with: Honda
    90108-SW3-003
    Bumper Retainer Clip
    Head Diameter: 16mm Stem Diameter: 4mm
    Stem Length: 21mm 0
    Compatible with Honda: 90108-SW3-003 95-02 Accord, 95-04 Odyssey, 97 - 01 Prelude & 00-01 S2000
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91560-S9A-A01 Acura TL & TSX and Honda Accord, Civic, CRV & Odyssey 2002-On N/A Auveco 20959
    Honda-BH-1017
    Compatible with: Honda
    91560-S9A-A01
    Door Panel Retainer
    Top Head Diameter: 13mm Middle Head Diameter: 16mm
    Bottom Head Diameter: 15mm Stem Diameter: 9.5mm Stem Length: 13mm
    Compatible with Honda & Acura: 91560-S9A-A01 Acura TL & TSX and Honda Accord, Civic, CRV & Odyssey 2002-On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91566-SP0-003 Honda 1990 - On PN:[10-064] Auveco 18294
    Honda-BH-1020
    Compatible with: Honda
    91566-SP0-003
    Door Panel Retainers
    Top Head Diameter: 13mm Bottom Head Diameter: 18mm
    Stem length: 14mm Stem Diameter: 9.5mm Fits 9mm Hole
    Compatible with Honda: 91566-SP0-003 Honda 1990 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91560-SM4-003 Honda Accord 1990 - On N/A Auveco 20610
    Honda-BH-1021
    Compatible with: Honda
    91560-SM4-003
    Door Panel Retainers
    Top Head Diameter: 13mm Middle Head Diameter: 18mm
    Bottom Head Diameter: 16mm Stem L-Dia 15-9mm, Fits 8mm Hole
    Compatible with Honda: 91560-SM4-003 Honda Accord 1990 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 71144-SR3-A00 Accord 1998-02, Civic 1992-00, CR-V 1997-01, Del Sol 1993-97 Prelude 1997-01, Integra 1994-01 TL 1999-03 PN:[10-222] Auveco 18415
    Honda-BH-1027
    Compatible with: Honda
    71144-SR3-A00
    Bumper Grommet
    0 0
    0 0
    Compatible with Honda & Acura: 71144-SR3-A00 Accord 1998-02, Civic 1992-00, CR-V 1997-01, Del Sol 1993-97 Prelude 1997-01, Integra 1994-01 TL 1999-03
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91501-SEA-003 Civic 2006 - On CRV 2007-08 , RDX 2007-08 PN:[11-394] Auveco 20882
    Honda-BH-1029
    Compatible with: Honda
    91501-SEA-003
    Cowl & Garnish Retainer
    Head Diameter: 20mm Stem Diameter: 6mm
    Stem Length: 15mm 0
    Compatible with Honda & Acura: 91501-SEA-003 Civic 2006 - On CRV 2007-08 , RDX 2007-08
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91560-SLJ-J01 Civic, CR-V & Pilot, Acura RDX 2009 - On PN:[11-402] Auveco 21208
    Honda-BH-1030
    Compatible with: Honda
    91560-SLJ-J01
    Door Trim Panel Retainer
    Top Head Size: 13mm Middle Head Size: 16mm
    Bottom Head: 18mm Stem Length: 12mm Fits Into 8.5mm Hole
    Compatible with Honda & Acura: 91560-SLJ-J01 Civic, CR-V & Pilot, Acura RDX 2009 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Nissan: 90667-SA7-0030, Nissan: 89427-98070 PN:[10-187] Auveco 16775
    Honda-BH-1042
    Compatible with: Honda
    90667-SA7-003
    Carpet Floor Mat Retainer
    Head Diameter: 20mm Stem Length: 15mm
    Stem Diameter: 4.5mm 0
    Compatible with Honda & Nissan: 90667-SA7-0030, Nissan: 89427-98070
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Nissan: 90667-SA0-0030, Nissan: 76996-01P02 N/A Auveco 16776
    Honda-BH-1043
    Compatible with: Honda
    90667-SA0-003
    Trim Panel Retainer
    Head Diameter: 18mm Stem Length: 20mm
    Stem Diameter: 7.5mm 0
    Compatible with Honda & Nissan: 90667-SA0-0030, Nissan: 76996-01P02
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Toyota: 90670-692-0030, Toyota: 90467-09065 N/A Auveco 16781
    Honda-BH-1044
    Compatible with: Honda
    90670-692-003
    Retaining Clips
    Head Diameter: 15mm Stem Length: 20mm
    Panel Thickness: 11mm Stem Diameter: 8.5mm Fits Into 7mm Hole
    Compatible with Honda & Toyota: 90670-692-0030, Toyota: 90467-09065
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Toyota: 74842-659-0030, Toyota: 90467-12078 N/A Auveco 16779
    Honda-BH-1045
    Compatible with: Honda
    74842-659-003
    Retaining Clip
    Head Diameter: 18mm Stem Length: 15mm
    Panel Thickness: 6mm Stem Diameter: 11mm Fits Into 8mm Hole
    Compatible with Honda & Toyota: 74842-659-0030, Toyota: 90467-12078
    Button Head Retainers
    Select Quantity
  • Compatible with Acura & Honda: 90602-SX0-003 Acura MDX, Honda Civic, Insight, Odyssey & Prelude 1995-On N/A Auveco 21107
    Honda-BH-1049
    Compatible with: Honda
    90602-SX0-003
    Cowl Retainer
    Top Head Diameter: 13mm Bottom Head Diameter: 16mm
    Stem Diameter: 4mm 0
    Compatible with Acura & Honda: 90602-SX0-003 Acura MDX, Honda Civic, Insight, Odyssey & Prelude 1995-On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91512-SJ6-J01 Acura TSX and Honda Civic & CR-V 2011 - 1997 N/A Auveco 21559
    Honda-BH-1053
    Compatible with: Honda
    91512-SJ6-J01
    Rocker Panel Tail Light & License Plate Housing Garnish Moulding Clip W Sealer
    Top Head Size: 9mm x 12mm Bottom Head Diameter: 13mm
    Stem Diameter: 7.5mm Stem Length: 9mm
    Compatible with Honda: 91512-SJ6-J01 Acura TSX and Honda Civic & CR-V 2011 - 1997
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 90679-692-0030 N/A Auveco 14308
    Honda-BH-1061
    Compatible with: Honda
    90679-692-003
    Body Side Moulding Clip
    10mm Wide, 12mm Long Snaps Into 10mm Hole
    0 0
    Compatible with Honda: 90679-692-0030
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 90108-SW3-003 Accord, Odyssey & Prelude 1995-On PN:[10-651] Auveco 19470
    Honda-BH-1068
    Compatible with: Honda
    90108-SW3-003
    Bumper Retainer
    Head Diameter: 16mm Stem Diameter: 4mm
    Stem Length: 21mm 0
    Compatible with Honda: 90108-SW3-003 Accord, Odyssey & Prelude 1995-On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 90602-SFA-004 Acura RL and Honda Civic, Civic Hybrid & Odyssey 2005 - On N/A Auveco 21308
    Honda-BH-1069
    Compatible with: Honda
    90602-SFA-004
    Cowl & Dash Moulding Clips
    Top Head Size: 13mm x 14mm Bottom Head Diameter: 16mm
    Stem Length: 13mm 0
    Compatible with Honda & Acura: 90602-SFA-004 Acura RL and Honda Civic, Civic Hybrid & Odyssey 2005 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 90602-S2A-003 Civic, Element, Fit, Insight & S2000 2001 - N/A
    Honda-BH-1070
    Compatible with: Honda
    90602-S2A-003
    Cowl Retainer
    Top Head Diameter: 12mm Bottom Head Diameter: 16mm
    Stem Diameter: 4mm Stem Length: 6.5mm
    Compatible with Honda: 90602-S2A-003 Civic, Element, Fit, Insight & S2000 2001 -
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 90672-671-003 Accord 1986-On PN:[10-589] Auveco 18157
    Honda-BH-1071
    Compatible with: Honda
    90672-671-003
    Headliner & Cowl Grille Retaining Clip
    Head Diameter: 13mm Stem Length: 16mm
    Panel Thickness: 5mm Fits Into 5mm Hole
    Compatible with Honda: 90672-671-003 Accord 1986-On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91501-SM4-003 Accord 1990-On PN:[10-143] Auveco 17205
    Honda-BH-1076
    Compatible with: Honda
    91501-SM4-003
    Cowl Top Retaining Clip
    Head Diameter: 14mm Stem Length: 15mm
    Fits Into 6mm Hole Stem Diameter: 8mm
    Compatible with Honda: 91501-SM4-003 Accord 1990-On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 90602-SAA-003 CRV & Fit 2003 - On N/A Auveco 21087
    Honda-BH-1077
    Compatible with: Honda
    90602-SAA-003
    Cowl Vent & Radiator Support Retainer
    Top Head Diameter: 12mm Middle Head Diameter: 16mm
    Bottom Head Diameter: 18mm Stem Length 14mm Diameter 9.7mm
    Compatible with Honda: 90602-SAA-003 CRV & Fit 2003 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 90602-S7S-003 Accord 2003 - On N/A Auveco 20611
    Honda-BH-1079
    Compatible with: Honda
    90602-S7S-003
    Cowl Vent Retainer
    Top Head Diameter: 12mm Bottom Head Diameter: 16mm
    Stem Diameter: 3mm Stem Length 7mm (Use With A20612)
    Compatible with Honda: 90602-S7S-003 Accord 2003 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91560-SZW-003 Civic 2012 - N/A Auveco 21675
    Honda-BH-1084
    Compatible with: Honda
    91560-SZW-003
    Door Panel & Interior Trim Retainer
    Top Head Diameter: 13mm Middle Head Diameter: 16mm
    Bottom Head Diameter: 18mm Stem Length 11mm Diameter 9.5mm
    Compatible with Honda: 91560-SZW-003 Civic 2012 -
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91560-S0X-A01 Accord, CR-V, Fit & Odyssey 2012 - 1999 N/A Auveco 21638
    Honda-BH-1086
    Compatible with: Honda
    91560-S0X-A01
    Door Trim Panel Retainer With Sealer
    Top Head Diameter: 13mm Middle Head Diameter: 16.5mm
    Stem Diameter: 9.5mm Stem Length: 11mm
    Compatible with Honda: 91560-S0X-A01 Accord, CR-V, Fit & Odyssey 2012 - 1999
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 90700-SB2-003 Prelude 1985-On PN:[10-535] Auveco 15998
    Honda-BH-1100
    Compatible with: Honda
    90700-SB2-003
    Hood Insulation Retainer
    Head Diameter: 30mm Stem Length: 9mm
    Stem Diameter: 6.5mm 0
    Compatible with Honda: 90700-SB2-003 Prelude 1985-On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91501-S1K-003 Acura 3.5RL & RSX And Honda Civic & CR-V 2000 - On PN:[10-830] Auveco 20609
    Honda-BH-1101
    Compatible with: Honda
    91501-S1K-003
    Hood Insulation Retainer
    Head Diameter: 30mm Stem Diameter: 15mm x 20mm
    Stem Length: 14mm 0
    Compatible with Honda & Acura: 91501-S1K-003 Acura 3.5RL & RSX And Honda Civic & CR-V 2000 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91501-SWA-003 Civic 2012 - On PN:[TF-F60] Auveco 21652
    Honda-BH-1102
    Compatible with: Honda
    91501-SWA-003
    Hood Insulation Retainer
    Head Diameter: 30mm Stem Diameter: 21mm
    Stem Length: 14mm 0
    Compatible with Honda: 91501-SWA-003 Civic 2012 - On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91520-SM4-C010 1990-On N/A Auveco 18114
    Honda-BH-1103
    Compatible with: Honda
    91520-SM4-C01
    Hood Insulation Retaining Clip
    Head Diameter: 10mm Stem Length: 10mm
    Panel Thickness: 4mm Stem Diameter 7.5mm Fits 6mm Hole
    Compatible with Honda & Acura: 91520-SM4-C010 1990-On
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 90667-SA0-0030: Nissan: 76996-01P02 N/A Auveco 16776
    Honda-BH-1107
    Compatible with: Honda
    90667-SA0-0030
     
    Head Diameter: 18mm Stem Length: 20mm
    Stem Diameter: 7.5mm  
    Compatible with Honda: 90667-SA0-0030: Nissan: 76996-01P02
    Button Head Retainers
    Select Quantity
  • Compatible with Honda & Acura: 90602-SFA-004 Acura RL and Honda Civic, Civic Hybrid & Odyssey 2005 -  A21308 A21308 C1166
    Honda-BH-1113
    Compatible with: Honda
    90602-SFA-004
    Cowl & Dash Moulding Clips
    Top Head Size: 13mm x 14mm Bottom Head Diameter: 16mm
    Stem Length: 13mm 0
    Compatible with Honda & Acura: 90602-SFA-004 Acura RL and Honda Civic, Civic Hybrid & Odyssey 2005 - C1166
    Button Head Retainers
    Select Quantity
  • Compatible with Honda And Acura: 90602-TA0-003 TSX & ZDX and Honda Accord & Fit 2008 - A21417 C1500
    Honda-BH-1114
    Compatible with: Honda
    90602-TA0-003
    Cowl Vent Retainer
    Top Head Size: 10mm x 14mm Bottom Head Diameter: 16mm
    Stem Diameter: 8mm Stem Length: 13mm
    Compatible with Honda And Acura: 90602-TA0-003 TSX & ZDX and Honda Accord & Fit 2008 - C1500
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 90667-SOD-003ZC Civic 1998 - Auveco 20334
    Honda-BH-1120
    Compatible with: Honda
    90667-S0D-003-ZC
    Trunk Garnish Retainer
    Head Diameter: 18mm Stem Diameter: 7.5mm Square
    Stem Length: 20mm 0
    Compatible with Honda: 90667-SOD-003ZC Civic 1998 -
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 90667-SOD-003ZC Civic 1998 - Auveco 20334
    Honda-BH-1120
    Compatible with: Honda
    90667-SOD-003ZC
    Trunk Garnish Retainer
    Head Diameter: 18mm Stem Diameter: 7.5mm Square
    Stem Length: 20mm 0
    Compatible with Honda: 90667-SOD-003ZC Civic 1998 -
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91560-SZW PN:[11-862]
    Honda-BH-1121
    Compatible with: Honda
    91560-SZW-003
    Door Panel & Interior Trim Retainer
    Top Head Diameter: 13mm Bottom Head Diameter: 18mm
    Stem Diameter: 9.5mm Stem Length: 11mm
    Compatible with Honda: 91560-SZW
    Button Head Retainers
    Select Quantity
  • Front Fender, Cowl & Dash Retainer PN:[C1952] Auveco 22054
    Honda-BH-1125
    Compatible with: Honda
    91501-SNA-003
    Front Fender, Cowl & Dash Retainer
    Head Diameter: 20mm Stem Diameter: 7mm
    Stem Length: 16mm Replaces Honda: 91501-SNA-003; Honda Civic & CR-V 2014 - 06
    Compatible with Front Fender, Cowl & Dash Retainer PN:[C1952] Auveco 22054
    Button Head Retainers
    Select Quantity
  • Compatible with Honda: 91591-SJ6-013 Acura TSX and Honda Accord, Odyssey & Ridgeline 2003 - On N/A
    Honda-DC-1001
    Compatible with: Honda
    91591-SJ6-013
    Door Lock Rod Clip
    5mm Rod Size Fits Into 7mm Hole
    Overall Height: 17mm 0
    Compatible with Honda: 91591-SJ6-013 Acura TSX and Honda Accord, Odyssey & Ridgeline 2003 - On
    Door Tailgate Hood Lock Clips
    Select Quantity
  • Compatible with Honda: 90677-671-0031 PN:[10-231] Auveco 14687
    Honda-DC-1104
    Compatible with: Honda
    90677-671-003
    Hood Prop Rod Clip
    Holds 8mm Prop Rod Snaps Into 9mm x 9mm Hole
    0 0
    Compatible with Honda: 90677-671-0031
    Door Tailgate Hood Lock Clips
    Select Quantity
  • Compatible with Honda 1990-On  GEO Prizm, Toyota
  A16828 A16828 H2124
    Honda-MB-9105
    Compatible with: Honda
    Auveco 16828
    12mm (1/2") Washer Head. O.D.
    10mm Hex 0
    Zinc & Yellow Dichromate #VALUE!
    Compatible with Honda 1990-On GEO Prizm, Toyota H2124
    Body Fender Nuts Bolts Screws
    Select Quantity
  • Compatible with Honda: 90114-SE0-000 1986 - A20259 A20259 H2069
    Honda-MB-9107
    Compatible with: Honda
    90114-SE0-000
    Splash Shield & General Purpose Phillips Truss Head Sems Screw
    #10 x 3/4” M4.8-1.61 x 19mm
    Washer O.D.: 16mm 0
    Compatible with Honda: 90114-SE0-000 1986 H2069
    Body Fender Nuts Bolts Screws
    Select Quantity
  • Compatible with Honda: 91504-SP1-003 Acura Legend, MDX, RL & ZDX and Honda Civic, CR-V & Odyssey 2012 - 1991 PN:[YT4128] Auveco 21158
    Honda-MC-0244
    Compatible with: Honda
    91504-SP1-003
    Rocker Panel & Fender Moulding Clip With Sealer
    Top Head Size: 16mm x 18mm Bottom Head Size: 18mm x 20mm
    Stem Length: 15mm Fits Into 10mm Hole
    Compatible with Honda: 91504-SP1-003 Acura Legend, MDX, RL & ZDX and Honda Civic, CR-V & Odyssey 2012 - 1991
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda:  91534-SE0-000 Accord 1986 - On N/A Auveco 17443
    Honda-MC-0245
    Compatible with: Honda
    91534-SE0-000
    Body Side Moulding Clip
    0 0
    0 0
    Compatible with Honda: 91534-SE0-000 Accord 1986 - On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 90651-TP8-003, 91568-TR0-003 Acura ILX & RDX and Honda Civic & CR-V 2012 - N/A
    Honda-MC-1008
    Compatible with: Honda
    90651-TP8-003
    Weatherstrip Retainer
    Top Head Size: 5mm x 15mm Bottom Head Diameter: 7.5mm
    Stem Diameter: 6.5mm Stem Length: 7mm
    Compatible with Honda: 90651-TP8-003, 91568-TR0-003 Acura ILX & RDX and Honda Civic & CR-V 2012 -
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with, Honda:  91528-SR4-003 92-02 Accord, 92-05 Civic N/A Auveco 19115
    Honda-MC-1022
    Compatible with: Honda
    91528-SR4-003
    Drip Rail Moulding Clips With Sealer
    0 0
    0 0
    Compatible with, Honda: 91528-SR4-003 92-02 Accord, 92-05 Civic
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda & Acura: 91570-SDA-A01 Accord 2003-08, Civic 2006-08, TL 2004-08, TSX 2004-08 N/A Auveco 21095
    Honda-MC-1033
    Compatible with: Honda
    91570-SDA-A01
    Roof Moulding Clips
    Width: 14mm Length: 62mm
    0 0
    Compatible with Honda & Acura: 91570-SDA-A01 Accord 2003-08, Civic 2006-08, TL 2004-08, TSX 2004-08
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda & Acura: 90694-SB0-003 Accord 1986-89, Civic 1988-91, Prelude 1983-87, Legend 1988-90 N/A Auveco 17281
    Honda-MC-1035
    Compatible with: Honda
    90694-SB0-003
    Windshield Moulding Clip
    0 0
    0 0
    Compatible with Honda & Acura: 90694-SB0-003 Accord 1986-89, Civic 1988-91, Prelude 1983-87, Legend 1988-90
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda &Acura: 91577-SV4-003 Accord & Odyssey 1994-On, Acura 2.2CL, 2.3CL & 3.0CL N/A Auveco 19476
    Honda-MC-1036
    Compatible with: Honda
    91577-SV4-003
    Windshield Left-Hand Corner Moulding Clip
    0 0
    0 0
    Compatible with Honda &Acura: 91577-SV4-003 Accord & Odyssey 1994-On, Acura 2.2CL, 2.3CL & 3.0CL
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda & Acura: 91534-SM4-003 Accord 1990-93, Acura Legend 1991-95 TL 1995-98 N/A Auveco 17282
    Honda-MC-1037
    Compatible with: Honda
    91534-SM4-003
    Windshield Moulding Clip
    0 0
    0 0
    Compatible with Honda & Acura: 91534-SM4-003 Accord 1990-93, Acura Legend 1991-95 TL 1995-98
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda & Acura: 91571-SDA-A01 Accord 2003-07, TL 2004-08 N/A Auveco 21096
    Honda-MC-1038
    Compatible with: Honda
    91571-SDA-A01
    Windshield Moulding Clips
    Width: 16mm Length: 75mm
    0 0
    Compatible with Honda & Acura: 91571-SDA-A01 Accord 2003-07, TL 2004-08
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda & Acura: 91576-SV4-003 Accord & Odyssey 1994-On, Acura 2.2CL, 2.3CL & 3.0CL N/A Auveco 19477
    Honda-MC-1039
    Compatible with: Honda
    91576-SV4-003
    Windshield Right-Hand Corner Moulding Clip
    0 0
    0 0
    Compatible with Honda & Acura: 91576-SV4-003 Accord & Odyssey 1994-On, Acura 2.2CL, 2.3CL & 3.0CL
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda & Acura: 91520-SR3-003 Civic 1992-95 , Del Sol 1993-97 , Integra 1994-01 N/A Auveco 17475
    Honda-MC-1040
    Compatible with: Honda
    91520-SR3-003
    Windshield Side Moulding Clip
    Use With Honda Acura 91511-SR3-003 0
    0 0
    Compatible with Honda & Acura: 91520-SR3-003 Civic 1992-95 , Del Sol 1993-97 , Integra 1994-01
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91570-SZA-305 Acura ZDX and Honda Odyssey & Pilot 2009 - On N/A Auveco 21543
    Honda-MC-1054
    Compatible with: Honda
    91570-SZA-305
    Windshield Moulding Clips
    Width: 8mm Length: 82mm
    0 0
    Compatible with Honda: 91570-SZA-305 Acura ZDX and Honda Odyssey & Pilot 2009 - On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 74806-SB6-003 Civic, Hatchback 1984-On N/A Auveco 16825
    Honda-MC-1055
    Compatible with: Honda
    74806-SB6-003
    Back Glass Moulding Clip
    Width: 33mm Length: 30mm
    Snaps Into 6mm Hole 0
    Compatible with Honda: 74806-SB6-003 Civic, Hatchback 1984-On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91510-SR3-003 Civic 1992-95 PN:[10-062] Auveco 17981
    Honda-MC-1056
    Compatible with: Honda
    91510-SR3-003
    Belt Moulding Clip
    0 0
    0 0
    Compatible with Honda: 91510-SR3-003 Civic 1992-95
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda & Acura Door Molding Accord 1990-02, Odyssey 1994-04 CL 1997-03 Prelude 1997-01 RL 1996-04 Pilot 2003-08 MDX 2001-06 TL 1999-03 PN:[10-640] Auveco 19415
    Honda-MC-1057
    Compatible with: Honda
    91527-SM4-003
    Belt Moulding Clip
    0 0
    0 0
    Compatible with Honda & Acura Door Molding Accord 1990-02, Odyssey 1994-04 CL 1997-03 Prelude 1997-01 RL 1996-04 Pilot 2003-08 MDX 2001-06 TL 1999-03
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda & Acura Door Molding Accord 1990-02, Odyssey 1994-04 CL 1997-03 Prelude 1997-01 RL 1996-04 Pilot 2003-08 MDX 2001-06 TL 1999-03 PN:[10-640] Auveco 19415
    Honda-MC-1057
    Compatible with: Honda
    91561-S84-A01
    Belt Moulding Clip
    0 0
    0 0
    Compatible with Honda & Acura Door Molding Accord 1990-02, Odyssey 1994-04 CL 1997-03 Prelude 1997-01 RL 1996-04 Pilot 2003-08 MDX 2001-06 TL 1999-03
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91589-SV4-003 Accord 1994 - On PN:[10-683] Auveco 20272
    Honda-MC-1059
    Compatible with: Honda
    91589-SV4-003
    Belt Moulding Clip
    Width: 20mm Length: 24mm
    0 0
    Compatible with Honda: 91589-SV4-003 Accord 1994 - On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91503-T2A-A01, Honda Accord 2013 - N/A
    Honda-MC-1060
    Compatible with: Honda
    91503-T2A-A01
    Belt Moulding Clip
    Width: 20mm Length: 29mm
    0 0
    Compatible with Honda: 91503-T2A-A01, Honda Accord 2013 -
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 90675-692-0031 N/A Auveco 14306
    Honda-MC-1062
    Compatible with: Honda
    90675-692-0031
    Body Side Moulding Clip
    18mm Wide 15mm Long Snaps Into 10mm Hole
    0 0
    Compatible with Honda: 90675-692-0031
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 90108-SS0-003, Accord 1998 - On N/A Auveco 20331
    Honda-MC-1063
    Compatible with: Honda
    90108-SS0-003
    Bumper Clip
    35mm Wide 38mm High
    Use with #8 Screw 0
    Compatible with Honda: 90108-SS0-003, Accord 1998 - On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with  N/A Auveco 20677
    Honda-MC-1067
    Compatible with: Honda
    71598-S30-013
    Rear Bumper Moulding Clip With Sealer
    Width: 34mm Length: 30mm
    Overall Height: 31mm 0
    Compatible with
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 60658-SB3-000 Civic 3D/4D 84-87 , Civic 3D 88-91 , Civic Wagon 88-91 ,,CRX 88-91 ,Civic 4D 88-91 N/A Auveco 17289
    Honda-MC-1074
    Compatible with: Honda
    60658-SB3-000
    Cowl Screen Screw Cover
    Head Diameter: 17mm Fits Into 12mm Hole
    0 0
    Compatible with Honda: 60658-SB3-000 Civic 3D/4D 84-87 , Civic 3D 88-91 , Civic Wagon 88-91 ,,CRX 88-91 ,Civic 4D 88-91
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 90601-SH3-014 Civic 1988-91 CRX 1988-91 PN:[10-810] Auveco 17442
    Honda-MC-1080
    Compatible with: Honda
    90601-SH3-014
    Door Belt Moulding Clip
    0 0
    0 0
    Compatible with Honda: 90601-SH3-014 Civic 1988-91 CRX 1988-91
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91531-ST0-003 Civic 2, 3 & 4 Door 1995-On N/A Auveco 19359
    Honda-MC-1082
    Compatible with: Honda
    91531-ST0-003
    Door Moulding Clip
    0 0
    0 0
    Compatible with Honda: 91531-ST0-003 Civic 2, 3 & 4 Door 1995-On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 75329-SH4-013 Accord 1990 - On N/A Auveco 21109
    Honda-MC-1083
    Compatible with: Honda
    75329-SH4-013
    Door Moulding Clip
    Head Size: 10mm x 12mm Stem Length: 13mm
    0 0
    Compatible with Honda: 75329-SH4-013 Accord 1990 - On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91528-S01-A01 4 Door Civic 1996-05 N/A Auveco 19115
    Honda-MC-1087
    Compatible with: Honda
    91528-S01-A01
    Drip Moulding Clip
    0 0
    0 0
    Compatible with Honda: 91528-S01-A01 4 Door Civic 1996-05
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 75305-SM4-A01 Honda Accord & Civic 2000 - 1990 N/A Auveco 21556
    Honda-MC-1090
    Compatible with: Honda
    75305-SM4-A01
    Fender Trim Moulding Clip
    Head Size: 13mm x 15mm Stem Length: 15mm
    0 0
    Compatible with Honda: 75305-SM4-A01 Honda Accord & Civic 2000 - 1990
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91502-S9A-003 CR-V 2002 - On N/A Auveco 21216
    Honda-MC-1091
    Compatible with: Honda
    91502-S9A-003
    Front & Rear Bumper Moulding Clip With Sealer
    Head Size: 14mm x 26mm Stem Length: 15mm
    Height: 28mm 0
    Compatible with Honda: 91502-S9A-003 CR-V 2002 - On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 75305-SHJ-003 nHonda Odyssey 2005 - On PN:[11-180] Auveco 21186
    Honda-MC-1092
    Compatible with: Honda
    75305-SHJ-003
    Front and Side Door Exterior Trim Moulding Clips
    Width: 13mm Length: 14mm
    Height: 13mm 0
    Compatible with Honda: 75305-SHJ-003 nHonda Odyssey 2005 - On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 90674-SC6-003 Accord 1984-On N/A Auveco 15474
    Honda-MC-1097
    Compatible with: Honda
    90674-SC6-003
    Back Glass Moulding Clip
    Width: 15mm Length: 38mm
    0 0
    Compatible with Honda: 90674-SC6-003 Accord 1984-On
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91550-S50-000ZK Civic, CR-V, Element & Insight 2006 - 2000 N/A Auveco 21477,Auveco 21477,Auveco 21190
    Honda-MC-1098
    Compatible with: Honda
    91550-S50-000
    Push-Type Retainer
    Head Diameter: 16mm Stem Length: 14mm
    Fits Into 7mm Hole 0
    Compatible with Honda: 91550-S50-000ZK Civic, CR-V, Element & Insight 2006 - 2000
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91550-S50-000ZK Civic, CR-V, Element & Insight 2006 - 2000 N/A Auveco 21477,Auveco 21477,Auveco 21190
    Honda-MC-1098
    Compatible with: Honda
    91550-S50-000ZK
    Push-Type Retainer
    Head Diameter: 16mm Stem Length: 14mm
    Fits Into 7mm Hole 0
    Compatible with Honda: 91550-S50-000ZK Civic, CR-V, Element & Insight 2006 - 2000
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91550-S50-000ZK Civic, CR-V, Element & Insight 2006 - 2000 N/A Auveco 21477,Auveco 21477,Auveco 21190
    Honda-MC-1098
    Compatible with: Honda
    91550-S50-000ZL
    Push-Type Retainer
    Head Diameter: 16mm Stem Length: 14mm
    Fits Into 7mm Hole 0
    Compatible with Honda: 91550-S50-000ZK Civic, CR-V, Element & Insight 2006 - 2000
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 91513-SMG-E11 CR-V 2009 - Auveco 21207,1AUTO 11-708 Auveco 21207
    Honda-MC-1110
    Compatible with: Honda
    91513-SMG-E11
    Fender Moulding Clips
    Top Head Size: 7mm x 7mm Bottom Head Size: 10mm x 19mm
    Stem Length: 6mm  
    Compatible with Honda: 91513-SMG-E11 CR-V 2009 -
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Acura Legend, MDX, RDX,
RL, TL & ZDX
1991 - On
Honda Civic, Element,
Odyssey & Pilot
2004 - On A21772 A21772 C1470
    Honda-MC-1116
    Compatible with: Honda
    76222-SP1-003
    Body Side, Fender Flare,Roof Garnish & Side Sill Moulding Clip With Sealer
    Top Head Size: 12.5mm x 14mm Bottom Head Diameter: 14mm
    Stem Diameter: 7mm Stem Length: 8mm
    Compatible with Acura Legend, MDX, RDX, RL, TL & ZDX 1991 - On Honda Civic, Element, Odyssey & Pilot 2004 - On A21772 C1470
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda 91514-SAA-003: Honda Fit 2013 - 2007 PN:[11-732]
    Honda-MC-1122
    Compatible with: Honda
    91514-SAA-003
    Rocker Panel Moulding Clip With Sealer
    Top Head Size: 18mm x 16mm Bottom Head Size: 22mm x 20mm
    Overall Height: 19mm  
    Compatible with Honda 91514-SAA-003: Honda Fit 2013 - 2007
    Window Moulding Trim Clips
    Select Quantity
  • Compatible with Honda: 90107-S0X-A01 Acura CL, MDX, RL, 3.2 CI & 3.5RI and Honda Accord, Pilot, Ridgeline & S2000 2011 - 1996 N/A Auveco 21521
    Honda-NG-1009
    Compatible with: Honda
    90107-S0X-A01
    Screw Grommet
    M4.8 (#10) Screw Size Head Size: 16mm x 16mm
    Stem Length: 7mm 0
    Compatible with Honda: 90107-S0X-A01 Acura CL, MDX, RL, 3.2 CI & 3.5RI and Honda Accord, Pilot, Ridgeline & S2000 2011 - 1996
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 90676-SA7-003 Prelude & Accord 1986-On N/A Auveco 17058
    Honda-NG-1026
    Compatible with: Honda
    90676-SA7-003
    Headlight Adjusting Screw Nut
    M5-.8 Screw Size 0
    0 0
    Compatible with Honda: 90676-SA7-003 Prelude & Accord 1986-On
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda & Toyota: 90672-671-8110M1, Toyota: 90189-04013 PN:[10-157]
    Honda-NG-1046
    Compatible with: Honda
    90672-671-811
    Screw Grommet #6 Screw Size
    Head Diameter: 14mm Stem Length: 15mm
    Fits Into 7mm x 7mm Hole 0
    Compatible with Honda & Toyota: 90672-671-8110M1, Toyota: 90189-04013
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda & Toyota: 90662-693-0030, Toyota: 9018-04066 PN:[10-483] Auveco 14281
    Honda-NG-1047
    Compatible with: Honda
    90662-693-003
    Screw Grommet #6 Screw Size
    Head Diameter: 14mm Stem Length: 10mm
    Fits Into 7mm x 7mm Hole 0
    Compatible with Honda & Toyota: 90662-693-0030, Toyota: 9018-04066
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 75316-S9A-004 Acura RDX and Honda CR-V 2012 - 02 N/A Auveco 21557
    Honda-NG-1051
    Compatible with: Honda
    75316-S9A-004
    Door Trim Moulding Clip
    Head Size: 14mm x 16mm Stem Length: 12mm
    Fits Into 10mm Hole 0
    Compatible with Honda: 75316-S9A-004 Acura RDX and Honda CR-V 2012 - 02
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 91512-S50-003 Acura TSX & ZDX and Honda Accord, Civic, Crosstour, Fit, Insight, Odyssey & Pilot 2012 - 01 N/A Auveco 21555
    Honda-NG-1052
    Compatible with: Honda
    91512-S50-003
    License Plate Garnish & Trim Moulding Clip With Sealer
    Top Head Size: 12mm x 17mm Bottom Head Size: 16mm x 17mm
    Stem Diameter: 13mm Stem Length: 12mm
    Compatible with Honda: 91512-S50-003 Acura TSX & ZDX and Honda Accord, Civic, Crosstour, Fit, Insight, Odyssey & Pilot 2012 - 01
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 90106-SW3-003 Accord, Odyssey & Prelude 1995 - On PN:[10-238] Auveco 19650
    Honda-NG-1066
    Compatible with: Honda
    90106-SW3-003
    Bumper Grommet
    Head Size: 18mm x 20mm Stem Length 19mm
    Fits Into 8mm x 11mm Hole 0
    Compatible with Honda: 90106-SW3-003 Accord, Odyssey & Prelude 1995 - On
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 90603-S7S-003 Honda Accord 2003 - On N/A Auveco 20612
    Honda-NG-1072
    Compatible with: Honda
    90603-S7S-003
    Cowl Vent Grommet With Sealer
    Flange Size: 10mm x 24mm Stem Length: 6mm
    Use With A20611 0
    Compatible with Honda: 90603-S7S-003 Honda Accord 2003 - On
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 91623-SM2-0030 Prelude & 2 Door Accord 1990-On N/A Auveco 19143
    Honda-NG-1081
    Compatible with: Honda
    91623-SM2-003
    Door Glass Guide Grommet
    #6 Screw Size 0
    0 0
    Compatible with Honda: 91623-SM2-0030 Prelude & 2 Door Accord 1990-On
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 90665-SM4-000 Prelude 1997 - On N/A Auveco 19646
    Honda-NG-1095
    Compatible with: Honda
    90665-SM4-000
    Front Door Screw Grommet
    #6 Screw Size Head Diameter: 14mm
    Stem Length: 10mm Fits Into 7mm x 7mm Hole
    Compatible with Honda: 90665-SM4-000 Prelude 1997 - On
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Acura & Honda: 90107-SX0-003 Acura 2.2CL, 2.3CL 1997-99, 2.5TL, 3.2TL 1995-98, 3.5RL 1996-98, Honda Accord 1998-02, Element 2003, Odyssey 1995-98, Prelude 1997-01, S2000 2000-08 PN:[10-292] Auveco 19734
    Honda-NG-1105
    Compatible with: Honda
    90107-SX0-003
    Bumper Grommet
    #10 Screw Size 0
    0 0
    Compatible with Acura & Honda: 90107-SX0-003 Acura 2.2CL, 2.3CL 1997-99, 2.5TL, 3.2TL 1995-98, 3.5RL 1996-98, Honda Accord 1998-02, Element 2003, Odyssey 1995-98, Prelude 1997-01, S2000 2000-08
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Honda: 91635-SM4-003 Accord 1990-93, Prelude 1992-96 PN:[10-183] Auveco 17609
    Honda-NG-1109
    Compatible with: Honda
    91635-sm4-003
    Headlight To Grille Spacer Bracket Grommet
    #10 Screw Size 0
    0 0
    Compatible with Honda: 91635-SM4-003 Accord 1990-93, Prelude 1992-96
    Nylon Nuts Inserts Grommets
    Select Quantity
  • Compatible with Acura & Honda: 90009-PY3-000 2000 - On N/A Auveco 20426
    Honda-OP-1004
    Compatible with: Honda
    90009-PY3-000
    Oil Drain Plug With Aluminum Gasket
    Thread: M14-1.5 Hex: 17mm
    Length Under Head: 15mm Washer Head O.D.: 24mm
    Compatible with Acura & Honda: 90009-PY3-000 2000 - On
    Oil Drain Plugs
    Select Quantity
  • Compatible with Honda/Acura: 91503-SZ5-003 Acura 3.5RL Honda Odyssey 1996 - On Accord '97 - '07 Civic '01 - '05CR-V '02 - '06 Element '03 - '08 PN:[10-354] Auveco 20564
    Honda-PR-0005
    Compatible with: Honda
    91503-SZ5-003
    Front & Rear Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 18mm
    Fits Into 10mm Hole 0
    Compatible with Honda/Acura: 91503-SZ5-003 Acura 3.5RL Honda Odyssey 1996 - On Accord '97 - '07 Civic '01 - '05CR-V '02 - '06 Element '03 - '08
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 90683-SA5-003 Prelude 1996-92 PN:[10-091] Auveco 19311
    Honda-PR-0036
    Compatible with: Honda
    90683-SA5-003
    Front Fender Skirt Push-Type Retainer
    Head Diameter: 15mm Stem Length: 13mm
    Fits Into 6mm Hole 0
    Compatible with Honda: 90683-SA5-003 Prelude 1996-92
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91505-S9A-003 Honda Accord 2006-08, Civic 2006-08, CR-V 2005-08, Element 2007, FIT 2007-08, Odyssey 2008, Acura MDX 2007-08 RDX 2007-08 PN:[10-955] Auveco 20986
    Honda-PR-0047
    Compatible with: Honda
    91505-S9A-003
    Front Bumper Push-Type Retainer With Internal Metal Insert
    Head Diameter: 20mm Stem Length: 13mm
    Fits Into 10mm Hole 0
    Compatible with Honda & Acura: 91505-S9A-003 Honda Accord 2006-08, Civic 2006-08, CR-V 2005-08, Element 2007, FIT 2007-08, Odyssey 2008, Acura MDX 2007-08 RDX 2007-08
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91508-SR3-000 Civic 1992 - 00, CR-V 1997 - 01, Del Sol 1993 - 1997, Odyssey 2001 - 04, Legend 1994 - 01 PN:[10-107] Auveco 18165
    Honda-PR-0060
    Compatible with: Honda
    91508-SR3-000
    Cowl Panel Push-Type Retainer
    Head Diameter: 17mm Stem Length: 9mm
    Fits Into 8mm Hole 0
    Compatible with Honda & Acura: 91508-SR3-000 Civic 1992 - 00, CR-V 1997 - 01, Del Sol 1993 - 1997, Odyssey 2001 - 04, Legend 1994 - 01
    Push Type Retainers
    Select Quantity
  • Compatible with Honda : 91502-SP0-003 90 - 97 Accord , 95 - 96 Odyssey , 92 - 96 Prelude PN:[10-018] Auveco 18119
    Honda-PR-0067
    Compatible with: Honda
    91502-SP0-003
    Front & Rear Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 25mm
    Fits Into 10mm Hole 0
    Compatible with Honda : 91502-SP0-003 90 - 97 Accord , 95 - 96 Odyssey , 92 - 96 Prelude
    Push Type Retainers
    Select Quantity
  • Compatible with Acura: 91503-SZ3-003, 3.5 RL Sedan & Honda: 91503-SZ5-003 1996-On PN:[10-634] Auveco 19233
    Honda-PR-0073
    Compatible with: Honda
    91503-SZ3-003
    Front Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 13mm
    Fits Into 10mm Hole 0
    Compatible with Acura: 91503-SZ3-003, 3.5 RL Sedan & Honda: 91503-SZ5-003 1996-On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91506-S9A-003 Accord, Civic CR-V & Fit and Acura MDX, RDX & TSX 2004 - 09 PN:[11-119] Auveco 21173
    Honda-PR-0279
    Compatible with: Honda
    91506-S9A-003
    Bumper & Splash Shield Push-Type Retainer With Metal Insert
    Head Diameter: 20mm Stem Length: 16mm
    Fits Into 10mm Hole 0
    Compatible with Honda: 91506-S9A-003 Accord, Civic CR-V & Fit and Acura MDX, RDX & TSX 2004 - 09
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91502-SM4-0000, ?Accord 1990-on PN:[10-115] Auveco 17143
    Honda-PR-1014
    Compatible with: Honda
    91502-SM4-000
    Head Diameter: 20mm
    Fits 10mm Hole  
       
    Compatible with Honda: 91502-SM4-0000,  Accord 1990-on
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91505-TM8-003 Acura ILX and Honda Insight 2012 - N/A
    Honda-PR-1016
    Compatible with: Honda
    91505-TM8-003
    Bumper and Wheel Well Liner Push-Type Retainer
    Head Diameter: 20mm Stem Length: 14mm
    Fits Into 10mm Hole 0
    Compatible with Honda: 91505-TM8-003 Acura ILX and Honda Insight 2012 -
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91508-SM4-003 PN:[10-566] Auveco 17192
    Honda-PR-1019
    Compatible with: Honda
    91508-SM4-003
    Cowl Panel Clip Retainers
    Head Diameter: 18mm Stem Length: 14mm
    Fits 8mm Hole 0
    Compatible with Honda: 91508-SM4-003
    Push Type Retainers
    Select Quantity
  • Compatible with Honda  & Acura : 91516-SK7-013 98 Accord , 97 - 01 CR-V , 88 - 91 CRX , 88 - 00 Civic , 93 - 97 DEL SOL , 88 - 01 Integra , 97 - 99 NSX , 97 - 98 TL PN:[10-123] Auveco 17350
    Honda-PR-1025
    Compatible with: Honda
    91516-SK7-013
    Hex Phillips Drive Splash Shield
    Hex Phillips Drive Splash Shield Retainer 5/16in (8mm) Hole Size
    Stem Length: 15mm Flange Diameter: 20mm
    Compatible with Honda & Acura : 91516-SK7-013 98 Accord , 97 - 01 CR-V , 88 - 91 CRX , 88 - 00 Civic , 93 - 97 DEL SOL , 88 - 01 Integra , 97 - 99 NSX , 97 - 98 TL
    Push Type Retainers
    Select Quantity
  • Compatible with Honda : 91501-S04-003  Honda Civic & Del Sol 1993 - On PN:[10-623] Auveco 19239
    Honda-PR-1028
    Compatible with: Honda
    91501-S04-003
    Front Fender Retainer
    Head Diameter: 20mm Stem Length: 10mm
    Fits Into 8mm Hole Front Fender 0
    Compatible with Honda : 91501-S04-003 Honda Civic & Del Sol 1993 - On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91503-S0K-A01 Civic 2006 - 08, Element 2003 - 08, Pilot 2006 - 08, TL 2003 PN:[11-107] Auveco 20608
    Honda-PR-1031
    Compatible with: Honda
    91503-S0K-A01
    Grille Mounting Push-Type Retainer
    Head Diameter: 20mm Stem Length: 14mm
    Fits Into 10mm Hole 0
    Compatible with Honda & Acura: 91503-S0K-A01 Civic 2006 - 08, Element 2003 - 08, Pilot 2006 - 08, TL 2003
    Push Type Retainers
    Select Quantity
  • Compatible with Acura & Honda: 91503-SK7-013 Integra 1990 - 01, Honda Odyssey 2005 - 08, S2000 2000 - 08 N/A Auveco 19723
    Honda-PR-1032
    Compatible with: Honda
    91503-SK7-013
    Center Pillar Moulding Screw Grommet
    #4 Screw Size Head Size: 10mm x 14mm
    Stem Length: 10mm 0
    Compatible with Acura & Honda: 91503-SK7-013 Integra 1990 - 01, Honda Odyssey 2005 - 08, S2000 2000 - 08
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91512-SM4-003 Accord 1990-97, Civic 1988-00, CRX 1988-91, Del Sol 1993-97, Prelude 1990-95, Integra 1989-95, Legend 1991-95, Vigor 1992-94 PN:[10-128] Auveco 17379
    Honda-PR-1034
    Compatible with: Honda
    91512-SM4-003
    Fender Splash Shield Push-Type Retainer
    Head Diameter: 20mm Stem Length: 9mm
    Fits Into 8mm Hole 0
    Compatible with Honda & Acura: 91512-SM4-003 Accord 1990-97, Civic 1988-00, CRX 1988-91, Del Sol 1993-97, Prelude 1990-95, Integra 1989-95, Legend 1991-95, Vigor 1992-94
    Push Type Retainers
    Select Quantity
  • Compatible with Honda 91545-SE0-0030-W1 Nissan 63848-01G00 Toyota 67771-52010-B1 Volvo 3541113 PN:[10-541] Auveco 16782
    Honda-PR-1041
    Compatible with: Honda
    91545-SE0-003
    Push-Type Retainer
    Head Diameter: 20mm Stem Length: 14mm
    Fits Into 8mm Hole 0
    Compatible with Honda 91545-SE0-0030-W1 Nissan 63848-01G00 Toyota 67771-52010-B1 Volvo 3541113
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 90688-SB0-003 Civic 1992 - 00, Odyssey 1999 - 04, Prelude 1983 - 87 PN:[10-142] Auveco 14698
    Honda-PR-1048
    Compatible with: Honda
    90688-SB0-003
    Airscoop Push-Type Retainer
    Head Diameter: 18mm Stem Length: 11mm
    Fits Into 6mm Hole 0
    Compatible with Honda: 90688-SB0-003 Civic 1992 - 00, Odyssey 1999 - 04, Prelude 1983 - 87
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Toyota: 90467-09139 Corolla 1992-On, Honda & Mazda 626 PN:[10-641] Auveco 19416
    Honda-PR-1064
    Compatible with: Honda
    90467-09139
    Bumper Cover & Wheel Housing Push-Type Retainer
    Head Diameter: 18mm Stem Length: 15mm
    Fits Into 9mm Hole 0
    Compatible with Honda & Toyota: 90467-09139 Corolla 1992-On, Honda & Mazda 626
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91504-SM4-000 Accord 1990-93 Vigor 1992-94 PN:[10-116] Auveco 19408
    Honda-PR-1065
    Compatible with: Honda
    91504-SM4-000
    Honda Bumper Fascia Push-Type Retainer
    Head Diameter: 20mm Stem Length: 24mm
    Fits Into 10mm Hole 0
    Compatible with Honda & Acura: 91504-SM4-000 Accord 1990-93 Vigor 1992-94
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91524-SE0-003 Accord 1986-On PN:[10-556] Auveco 17081
    Honda-PR-1073
    Compatible with: Honda
    91524-SE0-003
    Cowl Push-Type Retainer
    Head Diameter: 18mm Stem Length: 12mm
    Fits Into 6mm Hole 0
    Compatible with Honda: 91524-SE0-003 Accord 1986-On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91508-S50-003 Accord & Odyssey 1998 - On PN:[10-653] Auveco 19547
    Honda-PR-1075
    Compatible with: Honda
    91508-S50-003
    Cowl Top Retainer
    Head Diameter: 17mm Stem Length: 13mm (Exc. Pin)
    Fits Into 9mm Hole 0
    Compatible with Honda: 91508-S50-003 Accord & Odyssey 1998 - On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 90687-SB0-003,90687-SB0-013 Prelude 1983-On PN:[10-148] Auveco 17287
    Honda-PR-1078
    Compatible with: Honda
    90687-SB0-003
    Cowl Vent Panel Retainer
    Head Diameter: 13mm Stem Length: 11mm
    Fits Into 6mm Hole 0
    Compatible with Honda: 90687-SB0-003,90687-SB0-013 Prelude 1983-On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91501-TR0-003 ?Civic 2012 - On PN:[11-507] Auveco 21651
    Honda-PR-1089
    Compatible with: Honda
    91501-TR0-003
    Fender Push-Type Retainer
    Head Diameter: 20mm Stem Length: 10mm
    Fits Into 8mm Hole 0
    Compatible with Honda: 91501-TR0-003  Civic 2012 - On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91503-S7A-003 Civic 2010 PN:[SK-791] Auveco 21297
    Honda-PR-1093
    Compatible with: Honda
    91503-S7A-003
    Front Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 11mm
    Fits Into 10mm Hole 0
    Compatible with Honda: 91503-S7A-003 Civic 2010
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91503-SHJ-A01 Odyssey 2010 - 05 N/A Auveco 21454
    Honda-PR-1094
    Compatible with: Honda
    91503-SHJ-A01
    Front Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 13mm
    Fits Into 10mm Hole 0
    Compatible with Honda: 91503-SHJ-A01 Odyssey 2010 - 05
    Push Type Retainers
    Select Quantity
  • Compatible with Honda Accord 1990-93, Prelude 1992-96 PN:[10-183] Auveco 17609
    Honda-PR-1099
    Compatible with: Honda
    easyremoval
    Headlight To Grille Spacer Bracket Grommet
      0
    0 0
    Compatible with Honda: Accord 1990-93, Prelude 1992-96
    Push Type Retainers
    Select Quantity
  • Compatible with Honda Accord 1990-93, Prelude 1992-96 PN:[10-183] Auveco 17609
    Honda-PR-1099
    Compatible with: Honda
    easyremoval
    Headlight To Grille Spacer Bracket Grommet
      0
    0 0
    Compatible with Honda: Accord 1990-93, Prelude 1992-96
    Push Type Retainers
    Select Quantity
  • Compatible with Acura: 91505-SL0-003 Legend 1991-95, NSX 1991-05, TSX 2004-08,
 Auveco 19231, PN:[10-633]
    Honda-PR-1106
    Compatible with: Honda
    91505-ST7-003
    Push-Type Cowl Clip
    Top Head Diameter: 6mm Head Diameter: 18mm
    Stem Length: 16mm Fits Into 8mm Hole
    Compatible with Acura: 91505-SL0-003 Legend 1991-95, NSX 1991-05, TSX 2004-08
    Push Type Retainers
    Select Quantity
  • Compatible with Acura: 91505-SL0-003 Legend 1991-95, NSX 1991-05, TSX 2004-08,
 Auveco 19231, PN:[10-633]
    Honda-PR-1106
    Compatible with: Honda
    91505-ST7-003ZA
    Push-Type Cowl Clip
    Top Head Diameter: 6mm Head Diameter: 18mm
    Stem Length: 16mm Fits Into 8mm Hole
    Compatible with Acura: 91505-SL0-003 Legend 1991-95, NSX 1991-05, TSX 2004-08
    Push Type Retainers
    Select Quantity
  • Compatible with: Honda: 90684-SA5-0030 , Isuzu: 8942981190 , Nissan: 10998-30880 PN:[10-135] Auveco 14696
    Honda-PR-1108
    Compatible with: Honda
    90684-SA5-0030
    Push-Type Retainer
    Head Diameter: 15mm Stem Length: 11mm
    Fits Into 6mm Hole  
    Compatible with: Honda: 90684-SA5-0030 , Isuzu: 8942981190 , Nissan: 10998-30880
    Push Type Retainers
    Select Quantity
  • Compatible with Acura HONDA OEM 14-17 RLX Exterior-Rocker Molding Clip 90501SDR003  PN:[11-873]
    Honda-PR-1123
    Compatible with: Honda
    90501SDR003
    Exterior-Rocker Molding Clip
    Top Head Diameter: 14mm Bottom Head Diameter: 20mm
    Stem Length: 21mm Fits Into 9mm Hole
    Compatible with Acura HONDA OEM 14-17 RLX Exterior-Rocker Molding Clip 90501SDR003
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 90672-SA0-0030, Mazda: 9928-91-053 A14298 A14298 C154
    Honda-RC-1112
    Compatible with: Honda
    90672-SA0-0030
    Releasable Cable Strap
    Overall Length: 148mm (5-3/4") Max. Bundle Diameter: 30mm
    Fits Into 7mm Hole 0
    Compatible with Honda: 90672-SA0-0030, Mazda: 9928-91-053 C154
    Retainer Clips
    Select Quantity
  • Compatible with Honda 90601-SMG-003: CR-V, HR-V & Pilot 2012 -  PN:[11-710]
    Honda-RC-1124
    Compatible with: Honda
    90601-SMG-003
    Front Bumper, Fender, Exterior Trim & Quarter Panel Moulding Clip
    Overall Height: 17.5mm Width at Bottom: 14mm
       
    Compatible with Honda 90601-SMG-003: CR-V, HR-V & Pilot 2012 -
    Retainer Clips
    Select Quantity
  • Compatible with Honda CR80 TRX650 ++ Clip 6mm Air Cleaner Fender Tail Light # 90675-SA5-003 Auveco 22105
    Honda-UJ-1119
    Compatible with: Honda
    90675-SA5-003
    Honda CR80 TRX650 ++ Clip 6mm Air Cleaner Fender Tail Light # 90675-SA5-003
    0 0
    0 0
    Compatible with Honda CR80 TRX650 ++ Clip 6mm Air Cleaner Fender Tail Light # 90675-SA5-003
    U J Fold Over Floating Nuts
    Select Quantity
  • Compatible with Honda: 90669-671-0000, 90669-671-0030, Toyota: 90463-10337 PN:[10-833] Auveco 14284
    Toyota-CS-2017
    Compatible with: Honda
    90669-671-0000
    Cable Strap
    Length: 110mm (5-5/16in) Max. Bundle Diameter.: 23mm
    Fits Into 6mm Hole 0
    Compatible with Honda: 90669-671-0000, 90669-671-0030, Toyota: 90463-10337
    Cable Strap Clamps
    Select Quantity
  • Compatible with Honda: 90669-671-0000, 90669-671-0030, Toyota: 90463-10337 PN:[10-833] Auveco 14284
    Toyota-CS-2017
    Compatible with: Honda
    90669-671-0030
    Cable Strap
    Length: 110mm (5-5/16in) Max. Bundle Diameter.: 23mm
    Fits Into 6mm Hole 0
    Compatible with Honda: 90669-671-0000, 90669-671-0030, Toyota: 90463-10337
    Cable Strap Clamps
    Select Quantity
  • Compatible with Honda: 90669-671-0000, 90669-671-0030, Toyota: 90463-10337 PN:[10-833] Auveco 14284
    Toyota-CS-2017
    Compatible with: Honda
    90669-671-003
    Cable Strap
    Length: 110mm (5-5/16in) Max. Bundle Diameter.: 23mm
    Fits Into 6mm Hole 0
    Compatible with Honda: 90669-671-0000, 90669-671-0030, Toyota: 90463-10337
    Cable Strap Clamps
    Select Quantity
  • Compatible with Isuzu: 8942180270, Mazda: B092-50-715, Mitsubishi: MB153825, Toyota: 90467-13011, Ford Escort, Honda & Plymouth Laser N/A Auveco 17195
    Toyota-NG-2132
    Compatible with: Honda
    90467-13011
    Grille Clip
    Width: 13mm Length: 22mm
       
    Compatible with Isuzu: 8942180270, Mazda: B092-50-715, Mitsubishi: MB153825, Toyota: 90467-13011, Ford Escort, Honda & Plymouth Laser
    Nylon Nuts Inserts Grommets
    Select Quantity