Contact Us Email:superlumination@cox.net
Search

Compatible with: Honda Push Type Retainers

  • Compatible with GM: 21075686 Saturn 2 Door & 4 Door Models 1991-On PN:[10-569] Auveco 17222 YT3450
    AB-PC-0003
    Compatible with: Honda
    90653-HC4-900
    Rocker Panel, Wheel Liner & Air Inlet Duct Applications
    Head Diameter: 15mm Stem Length: 20mm
    Fits Into 8mm Hole Rocker Panel, Wheel Liner & Air Inlet Duct Applications
    Compatible with GM: 21075686 Saturn 2 Door & 4 Door Models 1991-On
    Push Type Retainers
    Select Quantity
  • Compatible with Acura: 91503-SP0-003 Legend 1991-On PN:[10-570] Auveco 17267
    AB-PC-0006
    Compatible with: Honda
    91503-SP0-003
    Front & Rear Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 15mm
    Fits Into 10mm Hole 0
    Compatible with Acura: 91503-SP0-003 Legend 1991-On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91550-SH3-003 Civic, Accord Wagon & Del Sol 1993-On PN:[10-072] Auveco 19142
    AB-PC-0035
    Compatible with: Honda
    91550-SH3-003
    Pillar Garnish, Side And Trunk Lining Push-Type Retainer
    Head Diameter: 15mm Stem Length: 13mm
    Fits Into 7mm Square Hole 0
    Compatible with Honda: 91550-SH3-003 Civic, Accord Wagon & Del Sol 1993-On
    Push Type Retainers
    Select Quantity
  • Compatible with Nissan: 01553-09241 240SX & Maxima 1994-On PN:[10-680] Auveco 20247
    AB-PC-0040
    Compatible with: Honda
    MR-200300
    Bumper Push-Type Retainer
    Push-Type Retainer Head Diameter: 18mm
    Stem Length: 15mm Fits Into 10mm Hole
    Compatible with Nissan: 01553-09241 240SX & Maxima 1994-On
    Push Type Retainers
    Select Quantity
  • Compatible with Nissan: 66824-01G00 PN:[10-085] Auveco 16783
    AB-PC-0043
    Compatible with: Honda
    90116-675-003ZA
    Push-Type Retainer
    Head Diameter: 12mm Stem Length: 8mm (N.I. The Pin)
    Fits Into 6mm Hole 0
    Compatible with Nissan: 66824-01G00
    Push Type Retainers
    Select Quantity
  • Compatible with Toyota: 90467-07164 Camry, Echo, MR2 & Sienna 1997 - On PN:[10-083] Auveco 20908,Auveco 19239,
    AB-PC-0048
    Compatible with: Honda
    91512-SX0-003
    Fender Splash Shield Push-Type Retainer
    Head Diameter: 20mm Stem Length: 10mm
    Fits Into 7mm Hole 0
    Compatible with Toyota: 90467-07164 Camry, Echo, MR2 & Sienna 1997 - On
    Push Type Retainers
    Select Quantity
  • Compatible with Acura / Honda: 90657-SB0-003 Accord 83 - 02, CR-V 02 - 06, Odyssey 95 - 98, Prelude 83 - 01, Legend PN:[10-082] Auveco 19186
    AB-PC-0066
    Compatible with: Honda
    91533-SG0-000
    Splash Shield Retainer
    Head Diameter: 11mm Stem Length: 10mm
    Fits Into 8mm Hole 0
    Compatible with Acura / Honda: 90657-SB0-003 Accord 83 - 02, CR-V 02 - 06, Odyssey 95 - 98, Prelude 83 - 01, Legend
    Push Type Retainers
    Select Quantity
  • Compatible with Acura / Honda: 90657-SB0-003 Accord 83 - 02, CR-V 02 - 06, Odyssey 95 - 98, Prelude 83 - 01, Legend PN:[10-082] Auveco 19186
    AB-PC-0066
    Compatible with: Honda
    90657-SB0-003
    Splash Shield Retainer
    Head Diameter: 11mm Stem Length: 10mm
    Fits Into 8mm Hole 0
    Compatible with Acura / Honda: 90657-SB0-003 Accord 83 - 02, CR-V 02 - 06, Odyssey 95 - 98, Prelude 83 - 01, Legend
    Push Type Retainers
    Select Quantity
  • Compatible with Acura: 90505-SL0-003, GM: 94852368, Mitsubishi: MB888869 Eclipse & Galant, Toyota: 90467-08155 1993-On PN:[10-081] Auveco 19140
    AB-PC-0069
    Compatible with: Honda
    90505-SL0-003
    Push-Type Retainer
    Head Diameter: 20mm Stem Length: 21mm
    Fits Into 8mm Hole 0
    Compatible with Acura: 90505-SL0-003, GM: 94852368, Mitsubishi: MB888869 Eclipse & Galant, Toyota: 90467-08155 1993-On
    Push Type Retainers
    Select Quantity
  • Compatible with: Honda: 90675-SB3-003, Mazda: FB01-56-964, Nissan: 63876-95596 PN:[10-045] Auveco 16000
    Acura-PR-0329
    Compatible with: Honda
    90675-sb3-003
    Push-Type Retainer
    Head Diameter: 20mm Stem Length: 9mm
    Fits Into 8mm Hole 0
    Compatible with: Honda: 90675-SB3-003, Mazda: FB01-56-964, Nissan: 63876-95596
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 90505-SM4-003 Accord 1990-On
 PN:[10-122] Auveco 17057
    Acura-PR-0335
    Compatible with: Honda
    90505-sm4-003
    Push-Type Retainer
    Head Diameter: 18mm Stem Length: 21mm
    Fits Into 8mm Hole 0
    Compatible with Honda: 90505-SM4-003 Accord 1990-On
    Push Type Retainers
    Select Quantity
  • Compatible with: GM: 94198687 , Honda: 90657-SA6-0030 , Mazda: N304-13-356-A PN:[10-175] Auveco 14697
    Acura-PR-0339
    Compatible with: Honda
    90657-sa6-0030
    Push-Type Retainer
    Head Diameter: 14mm Stem Length: 11mm
    Fits Into 7mm Hole 0
    Compatible with: GM: 94198687 , Honda: 90657-SA6-0030 , Mazda: N304-13-356-A
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 90505-SX0-003 Odyssey 1995 - On PN:[10-649] Auveco 19453
    Acura-PR-0349
    Compatible with: Honda
    90505-sx0-003
    Garnish Side Protector Push-Type Retainer
    Head Diameter: 18mm Stem Length: 15mm (Not Including The Pin)
    Fits Into 8mm Hole 0
    Compatible with Honda: 90505-SX0-003 Odyssey 1995 - On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91505-TM8-003 Acura ILX and Honda Insight 2012 - A21706 A21706 C1518
    Acura-PR-0371
    Compatible with: Honda
    91505-TM8-003
    Bumper and Wheel Well Liner Push-Type Retainer
    Head Diameter: 20mm Stem Length: 14mm
    Fits Into 10mm Hole 0
    Compatible with Honda: 91505-TM8-003 Acura ILX and Honda Insight 2012 - A21706
    Push Type Retainers
    Select Quantity
  • Compatible with Honda Trunk Side Trim Clip 90667-TC0-U01ZA PN:[11-864]
    Acura-PR-0377
    Compatible with: Honda
    90667TC0U01ZA
    Trunk Side Trim Clip
    Top Head Diameter: 15mm Bottom Head Diameter: 16mm
    Stem Length:14mm Fits Into 6mm Hole
    Compatible with Honda Trunk Side Trim Clip 90667-TC0-U01ZA
    Push Type Retainers
    Select Quantity
  • Compatible with BMW Honda Renault Peugeot PN:[10-185] Auveco 20187
    German-PR-0433
    Compatible with: Honda
    JC-RCX010-2
    SIDE SILL SKIRT CLIPS EXTERIOR
    Head Size: 12mm Length: 12mm
    Fits Into 5mm Hole  
    Compatible with BMW Honda Renault Peugeot
    Push Type Retainers
    Select Quantity
  • Compatible with Honda Acura: 91503-SZ5-003 Acura 3.5RL Honda Odyssey 1996 - On Accord '97 - '07 Civic '01 - '05CR-V '02 - '06 Element '03 - '08 PN:[10-354] Auveco 20564
    Honda-PR-0005
    Compatible with: Honda
    91503-SZ5-003
    Front & Rear Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 18mm
    Fits Into 10mm Hole 0
    Compatible with Honda/Acura: 91503-SZ5-003 Acura 3.5RL Honda Odyssey 1996 - On Accord '97 - '07 Civic '01 - '05CR-V '02 - '06 Element '03 - '08
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 90683-SA5-003 Prelude 1996-92 PN:[10-091] Auveco 19311
    Honda-PR-0036
    Compatible with: Honda
    90683-SA5-003
    Front Fender Skirt Push-Type Retainer
    Head Diameter: 15mm Stem Length: 13mm
    Fits Into 6mm Hole 0
    Compatible with Honda: 90683-SA5-003 Prelude 1996-92
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91505-S9A-003 Honda Accord 2006-08, Civic 2006-08, CR-V 2005-08, Element 2007, FIT 2007-08, Odyssey 2008, Acura MDX 2007-08 RDX 2007-08 PN:[10-955] Auveco 20986
    Honda-PR-0047
    Compatible with: Honda
    91505-S9A-003
    Front Bumper Push-Type Retainer With Internal Metal Insert
    Head Diameter: 20mm Stem Length: 13mm
    Fits Into 10mm Hole 0
    Compatible with Honda & Acura: 91505-S9A-003 Honda Accord 2006-08, Civic 2006-08, CR-V 2005-08, Element 2007, FIT 2007-08, Odyssey 2008, Acura MDX 2007-08 RDX 2007-08
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91508-SR3-000 Civic 1992 - 00, CR-V 1997 - 01, Del Sol 1993 - 1997, Odyssey 2001 - 04, Legend 1994 - 01 PN:[10-107] Auveco 18165
    Honda-PR-0060
    Compatible with: Honda
    91508-SR3-000
    Cowl Panel Push-Type Retainer
    Head Diameter: 17mm Stem Length: 9mm
    Fits Into 8mm Hole 0
    Compatible with Honda & Acura: 91508-SR3-000 Civic 1992 - 00, CR-V 1997 - 01, Del Sol 1993 - 1997, Odyssey 2001 - 04, Legend 1994 - 01
    Push Type Retainers
    Select Quantity
  • Compatible with Honda : 91502-SP0-003 90 - 97 Accord , 95 - 96 Odyssey , 92 - 96 Prelude PN:[10-018] Auveco 18119
    Honda-PR-0067
    Compatible with: Honda
    91502-SP0-003
    Front & Rear Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 25mm
    Fits Into 10mm Hole 0
    Compatible with Honda : 91502-SP0-003 90 - 97 Accord , 95 - 96 Odyssey , 92 - 96 Prelude
    Push Type Retainers
    Select Quantity
  • Compatible with Acura: 91503-SZ3-003, 3.5 RL Sedan & Honda: 91503-SZ5-003 1996-On PN:[10-634] Auveco 19233
    Honda-PR-0073
    Compatible with: Honda
    91503-SZ3-003
    Front Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 13mm
    Fits Into 10mm Hole 0
    Compatible with Acura: 91503-SZ3-003, 3.5 RL Sedan & Honda: 91503-SZ5-003 1996-On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91506-S9A-003 Accord, Civic CR-V & Fit and Acura MDX, RDX & TSX 2004 - 09 PN:[11-119] Auveco 21173
    Honda-PR-0279
    Compatible with: Honda
    91506-S9A-003
    Bumper & Splash Shield Push-Type Retainer With Metal Insert
    Head Diameter: 20mm Stem Length: 16mm
    Fits Into 10mm Hole 0
    Compatible with Honda: 91506-S9A-003 Accord, Civic CR-V & Fit and Acura MDX, RDX & TSX 2004 - 09
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91502-SM4-0000, ?Accord 1990-on PN:[10-115] Auveco 17143
    Honda-PR-1014
    Compatible with: Honda
    91502-SM4-000
    Head Diameter: 20mm
    Fits 10mm Hole  
       
    Compatible with Honda: 91502-SM4-0000,  Accord 1990-on
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91505-TM8-003 Acura ILX and Honda Insight 2012 - N/A
    Honda-PR-1016
    Compatible with: Honda
    91505-TM8-003
    Bumper and Wheel Well Liner Push-Type Retainer
    Head Diameter: 20mm Stem Length: 14mm
    Fits Into 10mm Hole 0
    Compatible with Honda: 91505-TM8-003 Acura ILX and Honda Insight 2012 -
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91508-SM4-003 PN:[10-566] Auveco 17192
    Honda-PR-1019
    Compatible with: Honda
    91508-SM4-003
    Cowl Panel Clip Retainers
    Head Diameter: 18mm Stem Length: 14mm
    Fits 8mm Hole 0
    Compatible with Honda: 91508-SM4-003
    Push Type Retainers
    Select Quantity
  • Compatible with Honda  & Acura : 91516-SK7-013 98 Accord , 97 - 01 CR-V , 88 - 91 CRX , 88 - 00 Civic , 93 - 97 DEL SOL , 88 - 01 Integra , 97 - 99 NSX , 97 - 98 TL PN:[10-123] Auveco 17350
    Honda-PR-1025
    Compatible with: Honda
    91516-SK7-013
    Hex Phillips Drive Splash Shield
    Hex Phillips Drive Splash Shield Retainer 5/16in (8mm) Hole Size
    Stem Length: 15mm Flange Diameter: 20mm
    Compatible with Honda & Acura : 91516-SK7-013 98 Accord , 97 - 01 CR-V , 88 - 91 CRX , 88 - 00 Civic , 93 - 97 DEL SOL , 88 - 01 Integra , 97 - 99 NSX , 97 - 98 TL
    Push Type Retainers
    Select Quantity
  • Compatible with Honda : 91501-S04-003  Honda Civic & Del Sol 1993 - On PN:[10-623] Auveco 19239
    Honda-PR-1028
    Compatible with: Honda
    90157-sp0-901
    Front Fender Push-Type Retainer
    Head Diameter: 20mm Stem Length: 10mm
    Fits Into 8mm Hole 0
    Compatible with Honda: 91501-S04-003 Civic & Del Sol 1993-On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91503-S0K-A01 Civic 2006 - 08, Element 2003 - 08, Pilot 2006 - 08, TL 2003 PN:[11-107] Auveco 20608
    Honda-PR-1031
    Compatible with: Honda
    91503-S0K-A01
    Grille Mounting Push-Type Retainer
    Head Diameter: 20mm Stem Length: 14mm
    Fits Into 10mm Hole 0
    Compatible with Honda & Acura: 91503-S0K-A01 Civic 2006 - 08, Element 2003 - 08, Pilot 2006 - 08, TL 2003
    Push Type Retainers
    Select Quantity
  • Compatible with Acura & Honda: 91503-SK7-013 Integra 1990 - 01, Honda Odyssey 2005 - 08, S2000 2000 - 08 N/A Auveco 19723
    Honda-PR-1032
    Compatible with: Honda
    91503-SK7-013
    Center Pillar Moulding Screw Grommet
    #4 Screw Size Head Size: 10mm x 14mm
    Stem Length: 10mm 0
    Compatible with Acura & Honda: 91503-SK7-013 Integra 1990 - 01, Honda Odyssey 2005 - 08, S2000 2000 - 08
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91512-SM4-003 Accord 1990-97, Civic 1988-00, CRX 1988-91, Del Sol 1993-97, Prelude 1990-95, Integra 1989-95, Legend 1991-95, Vigor 1992-94 PN:[10-128] Auveco 17379
    Honda-PR-1034
    Compatible with: Honda
    91512-SM4-003
    Fender Splash Shield Push-Type Retainer
    Head Diameter: 20mm Stem Length: 9mm
    Fits Into 8mm Hole 0
    Compatible with Honda & Acura: 91512-SM4-003 Accord 1990-97, Civic 1988-00, CRX 1988-91, Del Sol 1993-97, Prelude 1990-95, Integra 1989-95, Legend 1991-95, Vigor 1992-94
    Push Type Retainers
    Select Quantity
  • Compatible with Honda 91545-SE0-0030-W1 Nissan 63848-01G00 Toyota 67771-52010-B1 Volvo 3541113 PN:[10-541] Auveco 16782
    Honda-PR-1041
    Compatible with: Honda
    91545-SE0-003
    Push-Type Retainer
    Head Diameter: 20mm Stem Length: 14mm
    Fits Into 8mm Hole 0
    Compatible with Honda 91545-SE0-0030-W1 Nissan 63848-01G00 Toyota 67771-52010-B1 Volvo 3541113
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 90688-SB0-003 Civic 1992 - 00, Odyssey 1999 - 04, Prelude 1983 - 87 PN:[10-142] Auveco 14698
    Honda-PR-1048
    Compatible with: Honda
    90688-SB0-003
    Airscoop Push-Type Retainer
    Head Diameter: 18mm Stem Length: 11mm
    Fits Into 6mm Hole 0
    Compatible with Honda: 90688-SB0-003 Civic 1992 - 00, Odyssey 1999 - 04, Prelude 1983 - 87
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Toyota: 90467-09139 Corolla 1992-On, Honda & Mazda 626 PN:[10-641] Auveco 19416
    Honda-PR-1064
    Compatible with: Honda
    90467-09139
    Bumper Cover & Wheel Housing Push-Type Retainer
    Head Diameter: 18mm Stem Length: 15mm
    Fits Into 9mm Hole 0
    Compatible with Honda & Toyota: 90467-09139 Corolla 1992-On, Honda & Mazda 626
    Push Type Retainers
    Select Quantity
  • Compatible with Honda & Acura: 91504-SM4-000 Accord 1990-93 Vigor 1992-94 PN:[10-116] Auveco 19408
    Honda-PR-1065
    Compatible with: Honda
    91504-SM4-000
    Honda Bumper Fascia Push-Type Retainer
    Head Diameter: 20mm Stem Length: 24mm
    Fits Into 10mm Hole 0
    Compatible with Honda & Acura: 91504-SM4-000 Accord 1990-93 Vigor 1992-94
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91524-SE0-003 Accord 1986-On PN:[10-556] Auveco 17081
    Honda-PR-1073
    Compatible with: Honda
    91524-SE0-003
    Cowl Push-Type Retainer
    Head Diameter: 18mm Stem Length: 12mm
    Fits Into 6mm Hole 0
    Compatible with Honda: 91524-SE0-003 Accord 1986-On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91508-S50-003 Accord & Odyssey 1998 - On PN:[10-653] Auveco 19547
    Honda-PR-1075
    Compatible with: Honda
    91508-S50-003
    Cowl Top Retainer
    Head Diameter: 17mm Stem Length: 13mm (Exc. Pin)
    Fits Into 9mm Hole 0
    Compatible with Honda: 91508-S50-003 Accord & Odyssey 1998 - On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 90687-SB0-003,90687-SB0-013 Prelude 1983-On PN:[10-148] Auveco 17287
    Honda-PR-1078
    Compatible with: Honda
    90687-SB0-003
    Cowl Vent Panel Retainer
    Head Diameter: 13mm Stem Length: 11mm
    Fits Into 6mm Hole 0
    Compatible with Honda: 90687-SB0-003,90687-SB0-013 Prelude 1983-On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91501-TR0-003 ?Civic 2012 - On PN:[11-507] Auveco 21651
    Honda-PR-1089
    Compatible with: Honda
    91501-TR0-003
    Fender Push-Type Retainer
    Head Diameter: 20mm Stem Length: 10mm
    Fits Into 8mm Hole 0
    Compatible with Honda: 91501-TR0-003  Civic 2012 - On
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91503-S7A-003 Civic 2010 PN:[SK-791] Auveco 21297
    Honda-PR-1093
    Compatible with: Honda
    91503-S7A-003
    Front Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 11mm
    Fits Into 10mm Hole 0
    Compatible with Honda: 91503-S7A-003 Civic 2010
    Push Type Retainers
    Select Quantity
  • Compatible with Honda: 91503-SHJ-A01 Odyssey 2010 - 05 N/A Auveco 21454
    Honda-PR-1094
    Compatible with: Honda
    91503-SHJ-A01
    Front Bumper Push-Type Retainer
    Head Diameter: 20mm Stem Length: 13mm
    Fits Into 10mm Hole 0
    Compatible with Honda: 91503-SHJ-A01 Odyssey 2010 - 05
    Push Type Retainers
    Select Quantity
  • Compatible with Honda Accord 1990-93, Prelude 1992-96 PN:[10-183] Auveco 17609
    Honda-PR-1099
    Compatible with: Honda
    easyremoval
    Headlight To Grille Spacer Bracket Grommet
      0
    0 0
    Compatible with Honda: Accord 1990-93, Prelude 1992-96
    Push Type Retainers
    Select Quantity
  • Compatible with Honda Accord 1990-93, Prelude 1992-96 PN:[10-183] Auveco 17609
    Honda-PR-1099
    Compatible with: Honda
    easyremoval
    Headlight To Grille Spacer Bracket Grommet
      0
    0 0
    Compatible with Honda: Accord 1990-93, Prelude 1992-96
    Push Type Retainers
    Select Quantity
  • Compatible with Acura: 91505-SL0-003 Legend 1991-95, NSX 1991-05, TSX 2004-08,
 Auveco 19231, PN:[10-633]
    Honda-PR-1106
    Compatible with: Honda
    91505-ST7-003
    Push-Type Cowl Clip
    Top Head Diameter: 6mm Head Diameter: 18mm
    Stem Length: 16mm Fits Into 8mm Hole
    Compatible with Acura: 91505-SL0-003 Legend 1991-95, NSX 1991-05, TSX 2004-08
    Push Type Retainers
    Select Quantity
  • Compatible with Acura: 91505-SL0-003 Legend 1991-95, NSX 1991-05, TSX 2004-08,
 Auveco 19231, PN:[10-633]
    Honda-PR-1106
    Compatible with: Honda
    91505-ST7-003ZA
    Push-Type Cowl Clip
    Top Head Diameter: 6mm Head Diameter: 18mm
    Stem Length: 16mm Fits Into 8mm Hole
    Compatible with Acura: 91505-SL0-003 Legend 1991-95, NSX 1991-05, TSX 2004-08
    Push Type Retainers
    Select Quantity
  • Compatible with: Honda: 90684-SA5-0030 , Isuzu: 8942981190 , Nissan: 10998-30880 PN:[10-135] Auveco 14696
    Honda-PR-1108
    Compatible with: Honda
    90684-SA5-0030
    Push-Type Retainer
    Head Diameter: 15mm Stem Length: 11mm
    Fits Into 6mm Hole  
    Compatible with: Honda: 90684-SA5-0030 , Isuzu: 8942981190 , Nissan: 10998-30880
    Push Type Retainers
    Select Quantity
  • Compatible with Acura HONDA OEM 14-17 RLX Exterior-Rocker Molding Clip 90501SDR003  PN:[11-873]
    Honda-PR-1123
    Compatible with: Honda
    90501SDR003
    Exterior-Rocker Molding Clip
    Top Head Diameter: 14mm Bottom Head Diameter: 20mm
    Stem Length: 21mm Fits Into 9mm Hole
    Compatible with Acura HONDA OEM 14-17 RLX Exterior-Rocker Molding Clip 90501SDR003
    Push Type Retainers
    Select Quantity